Ford Transit Topo 2.0 Front and Rear Lift Kit (2013+)
Improve the ride quality and stance of your Ford Transit with the Topo 2.0 Front and Rear Suspension Lift Kit (2013+), developed specifically to work around the packaging and front CV shaft constraints presented with the 2020 AWD Transit platform, this kit is compatible with both RWD and AWD Transit models from 2013-present to deliver a true 2.0” of quality suspension lift. This kit fits both single- and dual-rear-wheel vans.
The Topo 2.0 kit consists of two critical components to achieve a true 2.0” of front lift, improving ground clearance and maintaining factory alignment specifications. The first component is a carefully engineered 1” lift coil, available in two versions:
- Blue Coil (Factory Spring Rate) - The blue coil retains the factory spring rate and returns the same plush ride as OEM while sitting 1” higher in the suspension travel for an increased 1” of compression travel.
- Red Coil (HD Spring Rate) - For heavily-loaded camper vans and T-350 models nearing their GVWR (Gross Vehicle Weight Rating), we developed our HD Red Coil with a 10% spring rate increase over stock to better handle the additional weight while still maintaining a true 1.0” of lift.
For optimum ride quality improvement on Transit RWD vans, pair the Topo 2.0 front kit with a Bilstein B6 strut (sold separately) for an additional ½” of lift and a great improvement in damping control. The Bilstein B6 strut has the coil spring perch welded onto the strut body at a ½” higher height than the factory strut, which preloads the coil spring an additional ½” for slightly more lift.
Note: This lift kit is designed for both single-rear-wheel (SRW) and dual-rear-wheel (DRW) 2014-current Ford Transit vans, both AWD and RWD versions. Bilstein B4 and B6 struts are not recommended for Transit AWD vans. For Ford Transit AWD models, the Bilstein strut body is approximately ¼” longer than the OEM strut. This means that at full droop, the suspension is at a total of +1.0” of extended downward travel which does put the passenger side CV joint into a slight bind. We cannot guarantee optimum CV life with this setup.
We recommend running a maximum tire size of 265/75/16 with this suspension package. This tire size will require some slight trimming of the inner pinch seam, details of which are covered in the instructions for this kit. With a Bilstein B6 strut, an astounding 12-3/4” of ground clearance is achieved under the center of the front suspension cross member with this tire size.
Notes: Spring lift heights will vary due to weight, but we typically see 1.25” of lift out of our Transit springs over the factory springs.
• Proudly made in the USA by VanCompass
Documents: Ford Transit Topo 2.0 Front and Rear Lift Kit (2013+)
Video: Ford Transit Topo 2.0 Front and Rear Lift Kit (2013+)
We Also Recommend