Menu
Cart 0

Lonseal Two-Part Epoxy for Flooring

  • $ 123.35


Ready to install your Lonseal flooring? Lonseal Two-Part Epoxy for Flooring is easy to use and install in vans, RVs, boats, trailers and more. Simply mix the two part solution together in the bucket provided and quickly smooth on to your level surface with the Lonseal U-Notch Trowel for a thin, even coat. Once your Epoxy is smoothed onto your surface, install your Lonseal from the center outward, smoothing the flooring over the epoxy with a silicone roller to eliminate air bubbles. Allow several hours to ensure proper setting of epoxy before walking or placing items on your Lonseal flooring. 

Key Features: Lonseal Two-Part Epoxy for Flooring

  • Wet set adhesive
  • CRI Green Label Plus Certified #GLP59909
  • Applications:
    • Properly prepared, non-porous substrates and existing vinyl floors
    • Locations with temperature extremes, such as saunas, cold-storage, or walk-in freezers
    • Areas where flooding is possible, including around drains, shower areas, public bathrooms, pool/whirlpool aprons, or laundry rooms
    • Areas expecting heavy point loading or heavy/dynamic rolling loads, like hospital beds
    • Can be used on properly prepared, non-porous substrates and existing vinyl floors

Application Information:

  • Adhesive must be applied by a trowel with 1/16" x 1/32" x 1/32" U-Notches (Model ZZ800 Trowel Sold Separately). These specs are specifically recommended by the adhesive MFG. If applied incorrectly the flooring will not lay properly.
  • Approx. Spread rate: 170 - 225 sq. ft./gal. *
  • Open time: Up to 15 minutes
  • Working time: Up to 15 minutes

Notes: Trowel sizes listed are by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.

*Actual job site spread rate will vary depending on the substrate conditions.

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.

Specifications: Lonseal Two-Part Epoxy for Flooring

  • Size: 1/2 Gallon, 1 Gallon
  • Style: 2-Part Epoxy

Documents: Lonseal Two-Part Epoxy for Flooring

Technical Data Sheet

Safety Data Sheet

Lonseal Vehicle installation (PDF)

Video: Lonseal Two-Part Epoxy for Flooring


We Also Recommend