Looking for easier access to the roof rack of your Mercedes Sprinter camper van? Access the strongest Mercedes Sprinter roof rack on the road with the strongest Backwoods Mercedes Sprinter (2014+) SLIM/XL - Ladder. With its unique design and perfect fit with your Backwoods SLIM or XL roof rack, it's the ideal addition to your adventure rig. Our ladders have steps that are deeper and flatter than anything on the market, giving you the opportunity to walk up and down the ladders barefoot without killing your feet.

Key Features: Backwoods Mercedes Sprinter (2014+) SLIM/XL - Ladder

• Proudly made in the USA by Backwoods Adventure Mods
• Compatible With 2014-2020 High Roof Mercedes Sprinter 144, 170 and 170 Ext Roof Rack, SLIM or XL
• 2-piece steel side ladder with 8 steps
• Deeper and flatter steps
• Special notches for better traction
• Black textured powder-coat finish
• Stainless-steel with black oxide coating
• Limited lifetime warranty.

How to Mount:

Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld. These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!

Video: Backwoods Mercedes Sprinter (2014+) SLIM/XL - Ladder