Camco Olympian Wave Heater Leg Stands
The Camco Olympian Wave Catalytic Heaters are a power- and fuel-efficient alternative to the standard RV forced-air propane furnace.
If you are going to use it as a portable heater, you'll want these Camco Olympian leg stands. Made out of sturdy black HDPE plastic, these will safely support your heater. These are not required if you are going to wall-mount the heater.
You'll also need an in-line regulator and hose for your Camco Olympian heater, like the 22-inch hose or 72-inch hose.
How does a catalytic heater work? When the catalytic heater is turned on, the heater's grid is preheated with an electric heating element embedded within the ceramic structure that supports the catalyst layer. Once the catalyst has reached 300°F, a thermo switch in the back of the heater closes, and gas is dispersed across the back of the heater, mingling with the catalyst. The hot catalyst and oxygen ignite the gas, causing a flameless combustion reaction, producing heat.
Warning: Catalytic heaters burn fuel, so they require oxygen and produce trace amounts of exhaust gases (~100 ppm CO, ~1500 ppm hexane, CO2 and water vapor). For safe use in your RV, you must keep a window or vent open so there is an adequate supply of oxygen for the heater and the occupants of the RV. Also, ensure you have functioning CO and LP gas detectors in your RV.
Safety notes: Laws differ state-by-state in the US on vent-free gas appliances, as shown in this list of state vent-free gas appliance regulations.
Key Features: Camco Olympian Wave Heater Leg Stands
- Suitable for use with Camco Olympian Wave 3, Wave 6 or Wave 8 catalytic heaters
- Olympian heaters can be safely operated at altitudes up to 12000 feet ASL
- Wave™ heaters operate on low-pressure LP gas, and can be wall-mounted or used as portables
- Limited 90-day warranty.
Specifications: Camco Olympian Wave Heater Leg Stands
We Also Recommend