Cart 0

Mercedes Sprinter (2007+) 2" Suspension Lift Kit (Front & Rear, DRW)

  • $ 1,800.00

Need a suspension lift kit for your 2007+ Mercedes Sprinter 3500 van? With the Striker 2" suspension lift kit, your Mercedes Sprinter van will take you farther on your next overland adventure than you have ever gone before. The Striker bolt-on suspension lift system provides clearance for up to a 33" tire*, allowing for higher ground clearance off-road, and helping you avoid obstacles on the trail when headed to your next camp.

The Striker suspension lift is designed for the Mercedes Sprinter 3500 dual-rear-wheel (DRW) van (2007-2018 models, also known as "NCV3"), and retains the stock Sprinter suspension and rake, keeping the van geometry, payload rating and ride quality unchanged.

This kit is very similar to the lift kit for the Sprinter 2500, but with these different components specifically for the Sprinter 3500:

  • Sprinter 3500 rear bump stock brackets
  • Sprinter 3500 rear lower shock mounts
  • Sprinter 3500 rear sway bar drop bracket
  • Sprinter 3500 transmission mount lift bracket

All of the suspension lift system components are constructed of high-quality materials in the USA, and are powder-coated for durability and corrosion resistance.

Note: If you are mounting this kit on a Sprinter 3500 factory-built RV, you may already have rear lift blocks installed on the rear axle. Let us know if you have these components already when you purchase.

Included Components: Mercedes Sprinter (2007+) 2" Suspension Lift Kit (Front & Rear, DRW)

Note this kit fits 2007-2018 Mercedes Sprinter 3500 144", 170"WB or 170"EXT dual-rear-wheel (DRW) vans. Does not fit 2019+ Sprinter vans. Includes the following components:

  • Front 2.0” strut spacer - 3/16” hot rolled steel
  • Front 2.0” subframe drop spacers - 4140 heat-treated chromoly
  • Motor mount 2.0” lift spacer - 4140 heat-treated chromoly
  • Transmission 2.0" lift spacer - 6061 aluminum
  • Steering shaft extension - 4140 heat-treated chromoly
  • Rear 2.0” lift block - 1/4” hot rolled steel
  • Rear sway bar links - 3/4" x .120 DOM and 3/16" hot rolled steel
  • Rear lower shock mounts - 1/8" hot rolled steel 
  • Rear bump stop drop brackets - 1/8" hot rolled steel
  • All necessary hardware
  • Proudly made in the USA by VanCompass
* Minor front bumper/fender and rear fender modification required to clear 33" tire.
Looking for a suspension lift kit for an earlier T1N (2001-2006) Sprinter van?

Documents: Mercedes Sprinter (2007+) 2" Suspension Lift Kit (Front & Rear, DRW)




We Also Recommend