Cart 0

Mercedes Sprinter 4x4 (2015+) 2" Suspension Lift Kit (Front & Rear)

  • $ 2,400.00

Need a suspension lift kit for your 2015+ Mercedes Sprinter 4x4 van? With the Striker 2" suspension lift kit, your Mercedes Sprinter 4x4 van will take you farther on your next overland adventure than you have ever gone before. The Striker bolt-on suspension lift system provides clearance for up to a 35" tire, allowing for higher ground clearance off-road, and helping you avoid obstacles on the trail when headed to your next camp.

The Striker suspension lift is designed for the Mercedes Sprinter 4x4 van (Sprinter 2500 2015+ 4x4 single-rear-wheel models), and retains the stock Sprinter suspension and rake, keeping the van geometry, payload rating and ride quality unchanged. It has more components than the standard Striker 2" Sprinter 2007+ 2WD kit, in particular the addition of two rear add-a-leaf spring packs which do a great job of smoothing the ride of your lifted van.

All of the suspension lift system components are constructed of high-quality materials in the USA, and are powder-coated for durability and corrosion resistance.

With this lift kit, you can fit tires as large as 315/75R17 (35”), if you:

  • Remove the front mudflaps
  • Trim the rear of the front fender
  • Trim the front bumper and front inner fender well liner.
  • Use at least a 9/16” (14mm) wheel spacer if using factory steel wheels with 54mm of offset, or any other wheel with comparable offset (spacer required for clearance between inside of the tire and the strut, not included). Spacer can be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.

Included Components: Mercedes Sprinter 4x4 (2015+) 2" Suspension Lift Kit (Front & Rear)

  • Front 2.0” strut spacer - 1/4” hot rolled steel
  • Front 2.0” subframe drop spacers - 4140 heat-treated chromoly
  • Motor mount 2.0” lift spacer - 4140 heat-treated chromoly
  • Transmission 2.0" lift spacer - 6061 aluminum
  • Steering shaft extension - 4140 heat-treated chromoly
  • Low pressure power steering hose extension
  • Front brake line relocation brackets
  • Rear add-a-leaf spring packs
  • Rear 2.0” lift blocks - 1/4” hot rolled steel
  • Rear sway bar links - 11/16" x .120 DOM and 3/16" hot rolled steel
  • Rear lower shock mounts - 1/8" hot rolled steel 
  • Rear bump stop drop brackets - 1/8" hot rolled steel
  • Rear wind assist extension bracket - 1/8" hot rolled steel
  • All necessary hardware

Note: Shipping on this kit is $125 anywhere in the mainland US.

 Documents: Mercedes Sprinter 4x4 (2015+) 2" Suspension Lift Kit (Front & Rear)

Video: Mercedes Sprinter 4x4 (2015+) 2" Suspension Lift Kit (Front & Rear)





We Also Recommend