Cart 0

Mercedes Striker 4x4 2007+ Sprinter Lift Kit (Stage 5)

  • $ 3,718.00

The Mercedes Striker 4x4 2007+Sprinter Stage 5 Lift kit combines our Stage 1 suspension package with Striker 4x4 Sprinter 2.0” suspension lift system. The kit improves the ride quality of the Mercedes Sprinter 2500 van, provides clearance for larger tires, and offers additional ground clearance. 

The Striker system retains the stock vehicle suspension geometry, payload rating, and ride quality. All of the suspension lift system components are constructed of high-quality materials here in the USA and are powder coated for durability and corrosion resistance.

Notes: 2019+ Mercedes Sprinter 2500 vans with rear A/C are not compatible with our front shock mounts.

Key Features: Mercedes Striker 4x4 2007+ Sprinter Lift Kit (Stage 5)

With this Mercedes Striker 4x4 2007+ Sprinter Lift Kit (Stage 5), 315/75/16 (35”) tires can be fitted with the following conditions met:

  • Removal of the front mudflaps
  • Slight trimming of the rear of the front fender
  • Trimming of the front bumper and front inner fender well liner.
  • Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender. ** Sold separately 
     this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.

The Mercedes Striker 4x4 Sprinter Lift Kit (Stage 5) includes:

  • Front 2.0” strut spacer - 1/4” hot rolled steel
  • Front 2.0” subframe drop spacers - 4140 heat-treated Chromoly
  • Motor mount 2.0” lift spacer - 3/16" hot rolled steel
  • Transmission 2.0" lift spacer - 3/16" hot rolled steel
  • Steering shaft extension - 4140 heat-treated Chromoly
  • Low-pressure power steering hose extension
  • Front brake line relocation brackets
  • Rear add-a-leaf spring pack
  • Rear sway bar links - 11/16" x .120 DOM and 3/16" hot rolled steel
  • Rear lower shock mounts - 1/8" hot rolled steel 
  • Rear bump stop drop brackets - 1/8" hot rolled steel
  • Rear ride height headlight adjustment extension bracket - 1/8" hot rolled steel
  • All necessary hardware 
  • Front Falcon shocks and mounting brackets
  • Front Sumo Springs
  • Rear Falcon shocks
  • Proudly made in the USA by VanCompass

Documents: Mercedes Striker 4x4 Sprinter Lift Kit (Stage 5)

Mercedes Sprinter 4x4 Front Lift Kit Stage 5 Instructions

Mercedes Sprinter 4x4 Rear Lift Kit Stage 5 Instructions

Mercedes Sprinter 4x4 Front shocks Stage 5 Instructions

Mercedes Sprinter 4x4 Rear shocks Stage 5 Instructions

Video: Mercedes Striker 4x4 2007+ Sprinter Lift Kit (Stage 5)



We Also Recommend