Serg Supply Ceiling Kit - Ram ProMaster 159'' High Roof


  • $ 2,243.66

Serg Supply Ceiling Kit is a specialized ceiling kit made to fit your Ram ProMaster 159'' High Roof.

Serg Supply's Promaster ceiling kit is the easiest ceiling kit on the market for DIY installation.  Every panel is CNC cut for the best possible fit in your ProMaster conversion. 

Upgrade your van today and experience the difference for yourself. Order your Serg Supply Ceiling Kit - Ram ProMaster 159'' now and take the first step towards a more organized and productive work environment.

Please read detailed install information at the bottom of page before ordering.

Key Features: Serg Supply Ceiling Kit - Ram ProMaster 159'' High Roof

  • Fits 2015+ Ram ProMaster 159" High Roof Cargo Vans
  • Does not fit low roof or 159" EXT models.
  • Extends to within 1/2" (12mm) of your factory wall edge
  • Outer rows wrap around factory beams 
  • Requires 3/4" furring strips to be fastened to factory beams using rivet-nuts
  • Panels are fastened to furring strips with 1-1/4" finish screws
  • Cover panels in the front and rear help hold panel spacing. Front cover panel is widened for easier drill access to holes above factory cockpit shelf
  • Union panels hold rows together from the backside to hold a consistent 1/8" gap between panels
  • Dual row contains up to 14 puck lights. Fan cutouts may affect the position and quantity of your lights

Free Shipping

Specifications: Serg Supply Ceiling Kit - Ram ProMaster 159'' High Roof

  • Material: 1/2" Plywood
  • Weight: 40-60 lbs
  • Width of Panels: Panels are range from 6 1/8" to 6 1/4"
  • Puck light holes: 2.125" Bore
  • Does not fit 159" EXT model ProMaster vans

What's Included?

  • Ceiling Panels
  • Rivet Nuts
  • Threaded Screws and Washers
  • Proper Drill Bit
  • Instructions
  • Light Pucks (12VLED) - Includes 12v distribution block (holds up to 12 lights), and AC-to-12VDC adapter.


How does the ceiling kit mount?

All Ram Promaster kits are designed to fit using furring strips. The furring strip is mounted to overhead beams using rivet nuts on factory holes and the ceiling panels are fastened to the furring strip using wood screws. The outer rows are cut to match the odd curvature of the overhead trusses in your Promaster.

Will the ceiling kits work with ceiling fan cutouts?

Yes, please choose from the drop down menu above.  Serg Supply will reach out to you once your order has been placed and walk you through measuring your fan cutout. 

How do I apply stain, finish, or sealer?


  • Lightly scuff the entire surface of the product that you plan on coating with 120-180 grit sandpaper.

  • Apply 2-3 coats of primer prior to applying your main coat.

  • Always apply a finish when you're happy with the paint to get a long lasting appearance.


  • Sand the surface on all faces with sandpaper traveling with the grain of the wood.

  • Apply stain very cautiously to a section of the product that will not be visible to gage the volume and pressure you need to achieve the look you want.

  • Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.

  • Please note that overlapping surfaces may make the stain darker on the overlapped areas.

  • Always apply a finish when you're happy with the stain to get a long lasting appearance.

We Also Recommend