Earn HQ points on every order. Learn more

Get 5% off all orders over 5K with 5OFF5K + Get 10% off all orders over 10K with 10OFF10K

OurKaravan 80/20 Wheel Well Cabinet

$ 1,300.00

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Every camper van needs interior cabinets and a power system - that's why this OurKaravan 80/20 Wheel Well Cabinet is such a great combination, giving you sleek, sturdy cabinets for all your gear and a custom solution tailored for your EcoFlow 5 kWh Power Kit.

EcoFlow introduced van builders to plug-and-play electrical systems, and now Campervan HQ and OurKaravan have teamed up to offer an easy-to-assemble aluminum cabinet kit to house your EcoFlow electrical system.  Constructed from lightweight and strong 80/20 extruded aluminum, the material is pre-cut, milled for fasteners and sent to you complete with all of the hardware required to assemble the cabinet and install an EcoFlow Power Kit inside. The cabinet framing kit sits over the wheel well on all wheelbase variations of the Mercedes Sprinter 2500, and not only securely holds your EcoFlow power kit but also provides an interior storage solution. 

The cabinet is easy to assemble with an Allen wrench set, and comes with upper and lower cabinet door tracks to accommodate ¼ inch plywood sliding doors.  Simply cut the doors to fit and insert into the tracks, no additional hardware required.  ¼ inch wooden end caps can be bolted to the threaded sides of the cabinet and your countertop of choice can be added for a personalized look.

This wheel well box is made for those ready for a substantial power upgrade without the hassle, and it fits over the wheel well in a Mercedes Sprinter van.

Key Features: OurKaravan 80/20 Wheel Well Cabinet

  • Designed to fit over the rear wheel well on any 2007+ Mercedes Sprinter 2500 van or 2015+ Ford Transit 148" EXT model
  • Can fit 2015+ Ford Transit 148" standard wheelbase cargo vans with a minor change in the assembly(see FAQ at bottom of page)
  • Can be fitted with 1/4-inch wooden panels (panels not included)
  • Fits 2kWh, 4kWh, 5kWh, 6kWh and 10kWh systems
  • Aluminum slots allow the cabinet to be bolted to the floor tie downs as well as the van sidewall. The cabinet can also be bolted to L-track or Adventure Wagon kits with L-track studs (not included).
  • Built in ventilation and wire-pass throughs for optimum performance
  • All EcoFlow components securely mounted to the framing using a combination of the included bolts and EcoFlow component brackets
  • Countertop installation may require purchase of L-brackets (<$10) and hardware to attach countertop to the framing. Screws or wood inserts can be used depending on material used.
  • Lightweight construction and easy to install
  • Built in ventilation and wire pass-throughs for optimum performance
  • 90-day warranty on wheel well box.

Specifications: OurKaravan 80/20 Wheel Well Cabinet

 Length 54 in.
 Height 32 in.
 Depth 16 3/4 in.
Weight w/ Fasteners 76 lbs.

 

FAQ: OurKaravan 80/20 Wheel Well Cabinet

How do I adapt this to my Ford Transit 148" wheelbase van?

With a minor configuration change to the pieces involved with mounting the Power Hub, you can adapt this to a 2015+ Ford Transt 148" wheelbase. More details expected mid-late July 2024. Fits  2015+ Ford Transit 148" EXT and any 2007+ Mercedes Sprinter models with no changes required. 

How do wheel well boxes mount?

The wheel well boxes are designed to attach into the van's interior wall and the sub-floor. We recommend using rivet nut inserts for the walls, but self-tapping screws will work for most builds.  

How do I apply paint, stain, or sealer?

1. If you plan on painting (the cabinet framing and/or wood panels):

Lightly scuff the areas of the cabinet that you plan on coating with 120-180 grit sandpaper.

Apply 2-3 coats of primer prior to applying your main coat. Note that metal and wood require different types of paint.

Always apply a finish when you're happy with the paint to get a long-lasting appearance.

2. If you plan on staining (wood panels):

Sand the surface on all wood panels with sandpaper parallel to the wood grain.

Apply stain very cautiously to a section of the panels that will not be visible to gauge the volume and pressure you need to achieve the look you want.

Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.

Note that overlapping surfaces may make the stain darker on the overlapped areas.

Always apply a finish when you're happy with the stain to get a long lasting appearance.

Vehicle fitment

Product type
EcoFlow power kit bundle
Vehicle
Camper vans, RVs, trailers, and off-grid power builds
Summary
Camper van builds that combine EcoFlow power components with compatible interior or cabinet systems. Confirm product specifications, electrical requirements, installation clearances, cable routing, and system compatibility before ordering.

Fitment FAQ

What does this EcoFlow power kit bundle fit?

This EcoFlow power kit bundle fits camper van builds that combine EcoFlow power components with compatible interior or cabinet systems.

Is this product vehicle-specific?

This is a universal EcoFlow bundle for camper van build planning, not a van-generation-specific product. Fit depends on cabinet layout, battery capacity, mounting space, cable routing, ventilation, and the complete electrical design.

What should I verify before ordering?

Confirm cabinet fit, system capacity, component list, cable lengths, mounting space, ventilation, and professional installation requirements before checkout.

What installation details matter?

Confirm cabinet dimensions, EcoFlow component compatibility, cable routing, ventilation, battery access, and installer wiring plan before ordering.

Who is this product best for?

This EcoFlow bundle is intended for integrated camper van electrical systems, interior build packages, and off-grid power planning.

Campervan HQ fitment guide

OurKaravan 80/20 Wheel Well Cabinet for camper van and RV power systems

OurKaravan 80/20 Wheel Well Cabinet supports camper vans, RVs, trailers, and off-grid power builds that need an integrated EcoFlow power system. Confirm battery capacity, AC/DC loads, solar and alternator charging, wiring, ventilation, mounting space, and installation clearances before ordering.

Why choose this product?

  • Supports integrated camper van and RV power systems
  • Helps plan battery capacity, charging inputs, and AC/DC loads
  • Useful for off-grid power, solar charging, and mobile living electrical upgrades

Installation context

  • Confirm battery capacity and kit configuration
  • Check AC/DC loads, solar input, alternator charging, and shore power needs
  • Verify mounting space, wiring routes, ventilation, and service access

Compatibility notes

EcoFlow Power Kits are universal power-system products for camper vans, RVs, trailers, and off-grid builds. Fit depends on electrical requirements, battery capacity, mounting space, cable routing, and installer-confirmed system design.

Common use cases

  • Camper van electrical systems
  • RV and trailer power upgrades
  • Off-grid battery and inverter setups