Aluminess 2008-2014 Ford E-Series Front Winch Bumper
Ford redesigned the front grille on the 2008 and newer E-Series vans, which allowed Aluminess to make a sleeker-looking bumper. The Aluminess 2008-2014 Ford E-Series Front Winch Bumper sits tucked back underneath the vehicle to keep the length down while still protecting the front end and housing a winch.
The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesnāt rust, so your Aluminess bumper will hold up even in salty environments.
Note:Ā Winch manufacturers are constantly changing winch sizes and designs. Solenoid relocation will likely be required with this bumper.Ā All Aluminess products are made to order and have a lead time of 10-12 weeks, depending on the component. Contact us at Campervan HQ for current lead times.Ā Because theseĀ bumpers are large and bulky, there is a $575 shipping charge.Ā
Key Features: Aluminess 2008-2014 Ford E-Series Front Winch Bumper
- Designed to fit 2008-2014 Ford E-Series vans, such as the E150, E250, and E350.
- Holds a Warn M12000 or 16.5ti winch
- Powder-coated black.
- If you donāt run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you donāt want cluttering up your van.
- Shackle mounts are built into the front bumper to accept a shackle with a 7/8ā³ pin.
- Proudly made in the USA.
Standard bumper configuration is square lights and 1.5ā (1.9ā OD) Brush Guard
Products shown with available options - Lights, shackles, receivers, and brush guard crossbars not included in standard bumper price
PLEASE NOTE:Ā Winch manufacturers are continually changing winch sizes and designs. Solenoid relocation will likely be required with this bumper.
Documents: Aluminess 2008-2014 Ford E-Series Front Winch Bumper
Ford E350 Van Front Winch Bumper (2008-2014) Installation InstructionsĀ
Video: Aluminess 2008-2014 Ford E-Series Front Winch Bumper
This video shows a Ujoint Offroad 4x4 build on a 2012 Ford E350 van with an Aluminess front winch bumper with brush guards, a rear swing-arm bumper with tire carrier and deluxe storage box, and nerf bars on both sides.
Ā
Ā
Vehicle fitment
- Product type
- Suspension system
- Vehicle
- Camper vans, RVs, trailers, and overland builds
- Years
- 2008-2014
- Summary
- Camper vans, RVs, trailers, and overland builds that need a compatible suspension system. Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Note: Winch manufacturers are constantly changing winch sizes and designs. Solenoid relocation will likely be required with this bumper. All Aluminess products are made to order and have a lead time of 10-12 weeks, depending on the component. Contact us at Campervan HQ for current lead times. Because these bumpers are large and bulky, there is a $575 shipping charge. Shackle mounts are built into the front bumper to accept a shackle with a 7/8ā³ pin. Products shown with available options - Lights, shackles, receivers, and brush guard crossbars not included in standard bumper price
Fitment FAQ
What does this Aluminess 2008-2014 Ford E-Series Front Winch Bumper fit?
This Aluminess 2008-2014 Ford E-Series Front Winch Bumper fits Camper vans, RVs, trailers, and overland builds.
Is this product vehicle-specific?
This suspension system is not tied to one van generation. Fit depends on measurements, installation requirements, and the build layout.
What should I verify before ordering?
Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before checkout.
What installation details matter?
Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Review these listing notes before installation: Note: Winch manufacturers are constantly changing winch sizes and designs. Solenoid relocation will likely be required with this bumper. All Aluminess products are made to order and have a lead time of 10-12 weeks, depending on the component. Contact us at Campervan HQ for current lead times. Because these bumpers are large and bulky, there is a $575 shipping charge. Shackle mounts are built into the front bumper to accept a shackle with a 7/8ā³ pin. Products shown with available options - Lights, shackles, receivers, and brush guard crossbars not included in standard bumper price Use professional installation when suspension setup, safety-critical hardware, or vehicle weight needs to be verified.
Who is this product best for?
This suspension system is intended for camper van conversions, RV upgrades, overland builds, and mobile installations where the product specifications match the build.
Campervan HQ fitment guide
Aluminess 2008-2014 Ford E-Series Front Winch Bumper for camper van and RV builds
Aluminess 2008-2014 Ford E-Series Front Winch Bumper supports Camper vans, RVs, trailers, and overland builds applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Camper vans, RVs, trailers, and overland builds that need a compatible suspension system. Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Note: Winch manufacturers are constantly changing winch sizes and designs. Solenoid relocation will likely be required with this bumper. All Aluminess products are made to order and have a lead time of 10-12 weeks, depending on the component. Contact us at Campervan HQ for current lead times. Because these bumpers are large and bulky, there is a $575 shipping charge. Shackle mounts are built into the front bumper to accept a shackle with a 7/8ā³ pin. Products shown with available options - Lights, shackles, receivers, and brush guard crossbars not included in standard bumper price
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds
Aluminess 2008-2014 Ford E-Series Front Winch Bumper
