Get 5% off all orders over 5K with 5OFF5K + Get 10% off all orders over 10K with 10OFF10K

Earn HQ points on every order. Learn more
1 4

Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel

$ 1,287.24
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Looking for a compact, efficient AC/DC RV refrigerator/freezer? The Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel is much more electrically efficient than a typical 3-way RV refrigerator (uses at most 3.6A@12VDC!), ensuring you'll aways have cold drinks and perfectly refrigerated food on your trips. This is the same model as former AC/DC NR740SS model, but now offering 12V/24V DC power supply only. 

This fridge also will help make sure you get a good night's sleep - its brushless, hermetically-sealed compressor is exceptionally quiet, producing only a gentle hum.

Danfoss BD-series compressors are renowned for their dependability, since the sealed casing is impervious to moisture, dust and dirt, and also will never leak lubricant or refrigerant.

This compact fridge has adjustable, removable door bins with large container storage. The white powder-coated shelves are durable and easy-to-clean.

Note: This refrigerator ships via truck freight, so shipping is $99.

Key Features: Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel

  • Danfoss BD35 sealed compressor for reliable and whisper-quiet operation
  • Full-depth freezer box with door
  • Stainless Steel Door panel and flange/trim
  • Adjustable, removable shelving
  • "Hidden" ventilation grill
  • Proud or flush-mount capability standard with each unit
  • Side mount - no visible fasteners in front
  • Cool blue LED interior light
  • Positive center-locking latch
  • Door swing can easily be switched to either side.
  • 12V/24V DC power capabilities

Specifications: Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel

Overall interior volume  1.5 cu. ft. 
Freezer section volume  0.3 cu. ft. 
Height (in.):  20-1/2" 
Width (in.):  15-1/4" 
Depth (in.):  17-7/8" 
Weight (lbs.)  41 lbs 
Voltage 12/24VDC, 110-240VAC 50/60Hz
Power consumption 3.6A (12VDC) , 1.8A (24VDC)
Color

Stainless steel trim, stainless steel insert panel

Special Requirements for Marine Installations: If the positive (+12/24 volts) input is grounded (by cuts in the wire insulation, incorrectly insulated components, etc.) a voltage potential can be caused throughout the boat, which causes corrosion to form on any metal parts that are exposed to water. This condition can be avoided by wiring the boat so that the DC grounds are common and the wiring is protected per NNMA CERTIFICATION HANDBOOK (1987). Inspect all wiring to make sure that the insulation is nott damaged and use plastic wire clamps.

Video: Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel

Vehicle fitment

Product type
RV refrigerator
Vehicle
Camper vans, RVs, trailers, and mobile builds
Summary
Camper vans, RVs, trailers, and mobile builds that need a compatible RV refrigerator. Confirm measurements, mounting location, clearances, installation requirements before ordering. Product listing notes: Proud or flush-mount capability standard with each unit Side mount - no visible fasteners in front Special Requirements for Marine Installations: If the positive (+12/24 volts) input is grounded (by cuts in the wire insulation, incorrectly insulated components, etc.) a voltage potential can be caused throughout the boat, which causes corrosion to form on any metal parts that are exposed to water. This condition can be avoided by wiring the boat so that the DC grounds are common and the wiring is protected per NNMA CERTIFICATION HANDBOOK (1987). Inspect all wiring to make sure that the insulation is nott damaged and use plastic wire clamps.

Fitment FAQ

What does this Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer fit?

This Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer fits Camper vans, RVs, trailers, and mobile builds.

Is this product vehicle-specific?

This RV refrigerator is not tied to one van generation. Fit depends on measurements, installation requirements, and the build layout.

What should I verify before ordering?

Confirm measurements, mounting location, clearances, installation requirements before checkout.

What installation details matter?

Confirm measurements, mounting location, clearances, installation requirements before ordering. Use professional installation when safety-critical, structural, electrical, fuel, water, or suspension work needs to be verified.

Who is this product best for?

This RV refrigerator is intended for camper van conversions, RV upgrades, overland builds, and mobile installations where the product specifications match the build.

Campervan HQ fitment guide

Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel for camper van and RV builds

Norcold 1.5 Cubic Foot DC Marine Refrigerator/Freezer (DC740SS) - Stainless Steel supports Camper vans, RVs, trailers, and mobile builds applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.

Why choose this product?

  • Supports camper van, RV, and mobile build planning
  • Helps confirm measurements, installation needs, and clearances before checkout
  • Useful for matching the product to the build layout before ordering

Installation context

  • Confirm measurements and clearances
  • Review wiring, mounting, sealant, or material requirements where relevant
  • Use professional installation when the build requires it

Compatibility notes

Camper vans, RVs, trailers, and mobile builds that need a compatible RV refrigerator. Confirm measurements, mounting location, clearances, installation requirements before ordering. Product listing notes: Proud or flush-mount capability standard with each unit Side mount - no visible fasteners in front Special Requirements for Marine Installations: If the positive (+12/24 volts) input is grounded (by cuts in the wire insulation, incorrectly insulated components, etc.) a voltage potential can be caused throughout the boat, which causes corrosion to form on any metal parts that are exposed to water. This condition can be avoided by wiring the boat so that the DC grounds are common and the wiring is protected per NNMA CERTIFICATION HANDBOOK (1987). Inspect all wiring to make sure that the insulation is nott damaged and use plastic wire clamps.

Common use cases

  • Camper van conversions
  • RV upgrades
  • Trailer and overland builds