Get 5% off all orders over 5K with 5OFF5K + Get 10% off all orders over 10K with 10OFF10K

Earn HQ points on every order. Learn more
1 2

Aluminess 1992-2007 Ford E-Series Front Winch Bumper

$ 3,000.00
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Aluminess designed the Aluminess 1992-2007 Ford E-Series Front Winch Bumper to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesn’t rust, so your bumper will hold up even in salty environments.

The Aluminess 1992-2007 Ford E-Series Front Winch Bumper  will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don’t run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don’t want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8″ pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done.

Note: This bumper is a large and bulky item, so freight shipping is required and calculated at checkout. All Aluminess products are made to order, and this item typically takes about 8-10 weeks build time. We will notify you with lead time after your order is processed. 

Key Features: Aluminess 1992-2007 Ford E-Series Front Winch Bumper

  • Fits 1992-2007 Ford E-Series and 1996-1999 Ford Econoline vans
  • Fabricated on state-of-the-art equipment
  • Built extremely tough to last a lifetime
  • All front winch bumpers now have vents and the Aluminess "A" cut into the front
  • Standard bumper configuration is 1.5" brush guard(1.9" OD)
  • All bumpers now made with square light holes

Products shown with available options - Lights, shackles, winches, receivers, and brush guard crossbars not included in standard bumper price

All bumpers are now made with SQUARE light holes.

PLEASE NOTE: Winch manufacturers are continually changing winch sizes and designs. Solenoid relocation will likely be required with this bumper.

Specifications: Aluminess 1992-2007 Ford E-Series Front Winch Bumper

  • Position: Front
  • Bumper Type: Light Duty
  • Color/Finish: Black Powder Coat
  • Material: Aluminum
  • Winch Compatible: Yes
  • D-Rings Mount: Yes(shackles not included)

Shipping Dimensions

Height
36 IN.

Width
87 IN.

Depth
48 IN.

Weight
205 LBS.

Documents: Aluminess 1992-2007 Ford E-Series Front Winch Bumper

Ford E-Series Front Winch Bumper (1992-2007) Installation Instructions


Vehicle fitment

Product type
Suspension system
Vehicle
Camper vans, RVs, trailers, and overland builds
Years
1992-2007
Summary
Camper vans, RVs, trailers, and overland builds that need a compatible suspension system. Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: The Aluminess 1992-2007 Ford E-Series Front Winch Bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don’t run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don’t want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8″ pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done. Note: This bumper is a large and bulky item, so freight shipping is required and calculated at checkout. All Aluminess products are made to order, and this item typically takes about 8-10 weeks build time. We will notify you with lead time after your order is processed. Fits 1992-2007 Ford E-Series and 1996-1999 Ford Econoline vans

Fitment FAQ

What does this Aluminess 1992-2007 Ford E-Series Front Winch Bumper fit?

This Aluminess 1992-2007 Ford E-Series Front Winch Bumper fits Camper vans, RVs, trailers, and overland builds.

Is this product vehicle-specific?

This suspension system is not tied to one van generation. Fit depends on measurements, installation requirements, and the build layout.

What should I verify before ordering?

Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before checkout.

What installation details matter?

Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Review these listing notes before installation: The Aluminess 1992-2007 Ford E-Series Front Winch Bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don’t run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don’t want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8″ pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done. Note: This bumper is a large and bulky item, so freight shipping is required and calculated at checkout. All Aluminess products are made to order, and this item typically takes about 8-10 weeks build time. We will notify you with lead time after your order is processed. Fits 1992-2007 Ford E-Series and 1996-1999 Ford Econoline vans Use professional installation when suspension setup, safety-critical hardware, or vehicle weight needs to be verified.

Who is this product best for?

This suspension system is intended for camper van conversions, RV upgrades, overland builds, and mobile installations where the product specifications match the build.

Campervan HQ fitment guide

Aluminess 1992-2007 Ford E-Series Front Winch Bumper for camper van and RV builds

Aluminess 1992-2007 Ford E-Series Front Winch Bumper supports Camper vans, RVs, trailers, and overland builds applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.

Why choose this product?

  • Supports camper van, RV, and mobile build planning
  • Helps confirm measurements, installation needs, and clearances before checkout
  • Useful for matching the product to the build layout before ordering

Installation context

  • Confirm measurements and clearances
  • Review wiring, mounting, sealant, or material requirements where relevant
  • Use professional installation when the build requires it

Compatibility notes

Camper vans, RVs, trailers, and overland builds that need a compatible suspension system. Confirm loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: The Aluminess 1992-2007 Ford E-Series Front Winch Bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don’t run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don’t want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8″ pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done. Note: This bumper is a large and bulky item, so freight shipping is required and calculated at checkout. All Aluminess products are made to order, and this item typically takes about 8-10 weeks build time. We will notify you with lead time after your order is processed. Fits 1992-2007 Ford E-Series and 1996-1999 Ford Econoline vans

Common use cases

  • Camper van conversions
  • RV upgrades
  • Trailer and overland builds