Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit
Part#
VCMP-4063
It's hard to not love the sleek, modern styling of the 2019+ Mercedes Sprinter VS30 vans. The only complaint we at Van Compass have about them is the tiny wheel openings Mercedes designed into them. Unfortunately, fitment of anything bigger than a 245/70/17 tire will rub the inner fender liners or pinch seam on the van. Even with our 2" Striker lift kits, the ability to run a larger tire is hindered without addressing the small wheel openings. The Big Tire Mudflap Bracket Kit allows fitment of up to a 35 x 12.5 x 17" tire on a 4x4 van equipped with our 2" Striker Lift Kit. 2wd vans can easily clear up to a 285/70/17 tire when paired with our 2" Striker lift system as well.
Our bracket kit addresses not only the small front wheel openings, but it also provides a solution in the rear of the van to get some proper tires on your VS30 Sprinter van. The Big Tire Mudflap Brackets are made from laser cut & CNC formed steel plate that has been powder coated for a durable, long lasting finish. Installation is simple and just requires cutting and trimming of the lower portions of the rear of the fender arches for a clean installation all while retaining the stock mudflaps for a near factory finished look.
Key Features: Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit
- Designed for 2019+ Mercedes Sprinter VS30 4X4 AWD/2WD vans only
- Enables fitment of larger tires by addressing limited factory wheel openings
- Allows up to 35x12.5R17 tire fitment on 4x4 vans with a 2" Striker Lift Kit
- Allows up to 285/70R17 tire fitment on 2WD vans with a 2" Striker Lift Kit
- Improves front and rear wheel opening clearance for oversized tire setups
- Retains factory mudflaps for a clean, near-OEM finished appearance
- Constructed from laser-cut and CNC-formed steel plate for strength and precision
- Powder-coated finish for enhanced durability and corrosion resistance
- Simple installation requiring minor trimming of lower rear fender arch sections
What's Included?
- Left and Right Front Relocation Brackets
- Left and Right Rear Relocation Brackets
- Hardware
Fitment Guide
MODEL: SPRINTER 2500 and 3500
YEAR: 2019-PRESENT
DRIVE TYPE: 4X4, AWD, 2WD
Documents: Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit
Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit Installation Guide
Vehicle fitment
- Product type
- Suspension system
- Vehicle
- Mercedes-Benz Sprinter
- Platform
- VS30 / 907 AWD 4x4 2WD 2500 3500
- Years
- 2019-current
- Summary
- Fits 2019-current Mercedes-Benz Sprinter VS30 / 907 AWD 4x4 2WD 2500 3500. Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: It's hard to not love the sleek, modern styling of the 2019+ Mercedes Sprinter VS30 vans. The only complaint we at Van Compass have about them is the tiny wheel openings Mercedes designed into them. Unfortunately, fitment of anything bigger than a 245/70/17 tire will rub the inner fender liners or pinch seam on the van. Even with our 2" Striker lift kits, the ability to run a larger tire is hindered without addressing the small wheel openings. The Big Tire Mudflap Bracket Kit allows fitment of up to a 35 x 12.5 x 17" tire on a 4x4 van equipped with our 2" Striker Lift Kit. 2wd vans can easily clear up to a 285/70/17 tire when paired with our 2" Striker lift system as well. Our bracket kit addresses not only the small front wheel openings, but it also provides a solution in the rear of the van to get some proper tires on your VS30 Sprinter van. The Big Tire Mudflap Brackets are made from laser cut & CNC formed steel plate that has been powder coated for a durable, long lasting finish. Installation is simple and just requires cutting and trimming of the lower portions of the rear of the fender arches for a clean installation all while retaining the stock mudflaps for a near factory finished look. Enables fitment of larger tires by addressing limited factory wheel openings
Fitment FAQ
What does this Van Compass 2019+ Mercedes Sprinter Big Tire fit?
This Van Compass 2019+ Mercedes Sprinter Big Tire fits 2019-current Mercedes-Benz Sprinter VS30 / 907 AWD 4x4 2WD 2500 3500 applications where the listed fitment details match.
Is this product vehicle-specific?
This is a vehicle-specific suspension system for 2019-current Mercedes-Benz Sprinter VS30 / 907 AWD 4x4 2WD 2500 3500. Confirm the listed model, year range, configuration, measurements, and installation requirements before ordering.
What should I verify before ordering?
Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before checkout.
What installation details matter?
Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Review these listing notes before installation: It's hard to not love the sleek, modern styling of the 2019+ Mercedes Sprinter VS30 vans. The only complaint we at Van Compass have about them is the tiny wheel openings Mercedes designed into them. Unfortunately, fitment of anything bigger than a 245/70/17 tire will rub the inner fender liners or pinch seam on the van. Even with our 2" Striker lift kits, the ability to run a larger tire is hindered without addressing the small wheel openings. The Big Tire Mudflap Bracket Kit allows fitment of up to a 35 x 12.5 x 17" tire on a 4x4 van equipped with our 2" Striker Lift Kit. 2wd vans can easily clear up to a 285/70/17 tire when paired with our 2" Striker lift system as well. Our bracket kit addresses not only the small front wheel openings, but it also provides a solution in the rear of the van to get some proper tires on your VS30 Sprinter van. The Big Tire Mudflap Brackets are made from laser cut & CNC formed steel plate that has been powder coated for a durable, long lasting finish. Installation is simple and just requires cutting and trimming of the lower portions of the rear of the fender arches for a clean installation all while retaining the stock mudflaps for a near factory finished look. Enables fitment of larger tires by addressing limited factory wheel openings Use professional installation when suspension setup, safety-critical hardware, or vehicle weight needs to be verified.
Who is this product best for?
This suspension system is intended for Mercedes-Benz Sprinter camper van conversions, RV upgrades, overland builds, and mobile installations where the listed fitment details match.
Campervan HQ fitment guide
Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit for camper van and RV builds
Van Compass 2019+ Mercedes Sprinter Big Tire Mudflap Relocation Kit supports Sprinter applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Fits 2019-current Mercedes-Benz Sprinter VS30 / 907 AWD 4x4 2WD 2500 3500. Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: It's hard to not love the sleek, modern styling of the 2019+ Mercedes Sprinter VS30 vans. The only complaint we at Van Compass have about them is the tiny wheel openings Mercedes designed into them. Unfortunately, fitment of anything bigger than a 245/70/17 tire will rub the inner fender liners or pinch seam on the van. Even with our 2" Striker lift kits, the ability to run a larger tire is hindered without addressing the small wheel openings. The Big Tire Mudflap Bracket Kit allows fitment of up to a 35 x 12.5 x 17" tire on a 4x4 van equipped with our 2" Striker Lift Kit. 2wd vans can easily clear up to a 285/70/17 tire when paired with our 2" Striker lift system as well. Our bracket kit addresses not only the small front wheel openings, but it also provides a solution in the rear of the van to get some proper tires on your VS30 Sprinter van. The Big Tire Mudflap Brackets are made from laser cut & CNC formed steel plate that has been powder coated for a durable, long lasting finish. Installation is simple and just requires cutting and trimming of the lower portions of the rear of the fender arches for a clean installation all while retaining the stock mudflaps for a near factory finished look. Enables fitment of larger tires by addressing limited factory wheel openings
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds




