Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune)
Part#
MID TUNE: VCMP-7051-2500-M
HEAVY TUNE: VCMP-7051-2500-M
Need a suspension upgrade for your Mercedes Sprinter AWD 4x4? The Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune) is the perfect foundation for dramatically improving ride quality, handling, and control. Designed for lightly built-out adventure vans, light Class B RVs, and passenger vans, this system tightens up loose handling while maintaining smooth, comfortable performance over any terrain.
At the heart of the Stage 1 system are VC-tuned Falcon 2.1 Monotube Shocks, installed at all four corners. Built with superior construction and a larger, more effective damper piston, these shocks dramatically reduce corner lean, violent sway, and harsh impacts. Whether navigating broken pavement or rugged off-road trails, these shocks deliver a smoother, more stable driving experience, enhancing comfort and reducing driver fatigue.
Also included are progressive foam Bump Buddy replacement jounce bumpers, replacing the factory rubber stops. These advanced bumpers improve spring curve progression, reduce sway, and increase bottom-out resistance without adding harshness or clunking, ensuring a quieter and smoother ride.
Key Features: Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune)
- Fits 2019+ Mercedes Sprinter AWD 4x4 2500 vans only
- VC tuned Falcon 2.1 Monotube shocks, front and rear
- Enhanced cornering stability and reduced wind sway
- More effective control over large and small bumps off road
- Improved handling feel on rough roads and broken pavement
- Increased bottom out resistance
What's Included?
- Falcon 2.1 Monotube Front Shocks with Mounting Brackets
- Front Bump Buddies
- Falcon 2.1 Monotube Rear Shocks
- Dust boots for all 4 shocks.
- All necessary hardware and instructions for a simple installation
Fitment Guide
MODEL: SPRINTER 2500
YEAR: 2019-PRESENT
DRIVE TYPE: 4X4 and AWD
>>COMPLETE WHEEL AND TIRE FITMENT GUIDE<<
>>DON'T KNOW YOUR VANS WEIGHT? USE THE CAT SCALE LOCATOR<<
Recommended Wheel Size: 17" x 8.5", +45mm offset
NOTE: Wheels with 6.5" backspacing, or +52mm offset on an 8" wheel, require a minimum 14 mm wheel spacer to prevent tire contact with auxiliary shocks at full steering angle. EX: Black Rhino Warlord, Method 701
NOTE: Vans equipped with HD Rear AC Package require extra care when mounting front shocks, refrigerant lines may need to be slightly bent and re-secured.
NOTE: NOT compatible with Sumo Spring Rebel series of springs, specifically Sumo Spring part numbers: SSR-327-47-2 and SSR-327-40-2 There is a Sumo Spring bracket associated with those kits which makes contact with the shock body.
Documents: Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune)
2015+ VS30 4x4 Falcon Front Shock Installation Instructions
NCV3, VS30 4x4 Falcon 2.1 Rear Shock Installation Instructions
Sprinter AWD and 4x4 Front Bump Buddies installation instructions
Video: Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune)
Vehicle fitment
- Product type
- Suspension system
- Vehicle
- Mercedes-Benz Sprinter
- Platform
- AWD 4x4 2500
- Years
- 2019-current
- Summary
- Fits 2019-current Mercedes-Benz Sprinter AWD 4x4 2500. Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Also included are progressive foam Bump Buddy replacement jounce bumpers, replacing the factory rubber stops. These advanced bumpers improve spring curve progression, reduce sway, and increase bottom-out resistance without adding harshness or clunking, ensuring a quieter and smoother ride. Fits 2019+ Mercedes Sprinter AWD 4x4 2500 vans only Falcon 2.1 Monotube Front Shocks with Mounting Brackets
Fitment FAQ
What does this Van Compass 2019+ Mercedes Sprinter AWD 4X4 fit?
This Van Compass 2019+ Mercedes Sprinter AWD 4X4 fits 2019-current Mercedes-Benz Sprinter AWD 4x4 2500 applications where the listed fitment details match.
Is this product vehicle-specific?
This is a vehicle-specific suspension system for 2019-current Mercedes-Benz Sprinter AWD 4x4 2500. Confirm the listed model, year range, configuration, measurements, and installation requirements before ordering.
What should I verify before ordering?
Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before checkout.
What installation details matter?
Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Review these listing notes before installation: Also included are progressive foam Bump Buddy replacement jounce bumpers, replacing the factory rubber stops. These advanced bumpers improve spring curve progression, reduce sway, and increase bottom-out resistance without adding harshness or clunking, ensuring a quieter and smoother ride. Fits 2019+ Mercedes Sprinter AWD 4x4 2500 vans only Falcon 2.1 Monotube Front Shocks with Mounting Brackets Use professional installation when suspension setup, safety-critical hardware, or vehicle weight needs to be verified.
Who is this product best for?
This suspension system is intended for Mercedes-Benz Sprinter camper van conversions, RV upgrades, overland builds, and mobile installations where the listed fitment details match.
Campervan HQ fitment guide
Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune) for camper van and RV builds
Van Compass 2019+ Mercedes Sprinter AWD 4X4 2500 - Stage 1 System (Mid/Heavy Tune) supports Sprinter applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Fits 2019-current Mercedes-Benz Sprinter AWD 4x4 2500. Confirm vehicle model, year range, drivetrain/configuration, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Also included are progressive foam Bump Buddy replacement jounce bumpers, replacing the factory rubber stops. These advanced bumpers improve spring curve progression, reduce sway, and increase bottom-out resistance without adding harshness or clunking, ensuring a quieter and smoother ride. Fits 2019+ Mercedes Sprinter AWD 4x4 2500 vans only Falcon 2.1 Monotube Front Shocks with Mounting Brackets
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds





