Van Compass 2023+ Mercedes Sprinter 170" - AWD Rocker Guards
Part#
VCMP-4109
Need rocker guards for your Mercedes Sprinter AWD (2023+)? The VVan Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170" adds functional protection, chassis rigidity and ease of access to your 170" wheelbase AWD Sprinter in sleek style with a set of Van Compass Rocker Guards. Our signature stealth design cues create an attractive 4" wide step to make getting in and out of your van more convenient, and the rear portion features an additional 1" of width for additional protection on tight trails. This robust design offers excellent body protection and adds easy to access vehicle lifting points. Integrated Hi-Lift jack slots make off-road recovery or flat tire changes go quickly and safely.
The main step surfaces are constructed from 1/8" steel and attach to the pinch seam with stainless steel hardware. Frame mounts are constructed from 3/16" steel and are attached in three locations directly to the vehicle's chassis. This additional reinforcement not only ensures a safe and solid mounting location, but increases torsional rigidity in the chassis of the vehicle. Drilling of holes at the pinch seam and under body gussets are required for installation.
NOTE: Step Surface Width: 3.5-4" (van body has slight taper at front door sill); 4.375" at rear kick out with doors closed.
** NOT COMPATIBLE with Winnebago Boldt, water tanks are in the way **
These ship in a very long crate, non-commercial address may be subject to additional delivery fees.
NOTE: Not compatible with Winnebago BOLDT
NOTE: Fits lifted and non-lifted applications.
Key Features: Van Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170"
- Designed for 2023+ Mercedes Sprinter AWD with 170" wheelbase
- 4" wide step surface at doors for easy access; 4.375" wide rear kick-out for extra protection
- Integrated Hi-Lift jack slots for safe lifting and off-road recovery
- 1/8" thick steel step surfaces for strength and durability
- 3/16" thick steel frame mounts increase chassis rigidity
- Stainless steel hardware included for corrosion resistance
- Powder coated for long-lasting durability and clean finish
- 100% bolt-on frame mounting with required drilling at the pinch seam
- Made in the USA
What's Included?
- Rocker Guard step plates, 1/8" Steel, Black Powdercoat
- Front, 2x Middle and Rear Chassis Tie In Brackets, 3/16" Steel, Black Powdercoat
- Stainless Mounting hardware with AL2000 black finish for step plates
Fitment Guide
MODEL: SPRINTER 2500 and 3500
YEAR: 2023+
DRIVE TYPE: AWD
NOTE: Not compatible with Winnebago BOLDT
NOTE: Fits lifted and non-lifted applications.
Documents: Van Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170"
2023+ Sprinter 170" wheelbase rocker guard installation instructions
Video: Van Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170"
Vehicle fitment
- Product type
- Suspension system
- Vehicle
- Mercedes-Benz Sprinter
- Platform
- AWD 2500 3500
- Wheel
base - 170"WB
- Summary
- Fits Mercedes-Benz Sprinter AWD 2500 3500. Confirm vehicle model, year range, drivetrain/configuration, wheelbase, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Need rocker guards for your Mercedes Sprinter AWD (2023+)? The VVan Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170" adds functional protection, chassis rigidity and ease of access to your 170" wheelbase AWD Sprinter in sleek style with a set of Van Compass Rocker Guards. Our signature stealth design cues create an attractive 4" wide step to make getting in and out of your van more convenient, and the rear portion features an additional 1" of width for additional protection on tight trails. This robust design offers excellent body protection and adds easy to access vehicle lifting points. Integrated Hi-Lift jack slots make off-road recovery or flat tire changes go quickly and safely. The main step surfaces are constructed from 1/8" steel and attach to the pinch seam with stainless steel hardware. Frame mounts are constructed from 3/16" steel and are attached in three locations directly to the vehicle's chassis. This additional reinforcement not only ensures a safe and solid mounting location, but increases torsional rigidity in the chassis of the vehicle. Drilling of holes at the pinch seam and under body gussets are required for installation. ** NOT COMPATIBLE with Winnebago Boldt, water tanks are in the way **
Fitment FAQ
What does this Van Compass 2023+ Mercedes Sprinter 170" - fit?
This Van Compass 2023+ Mercedes Sprinter 170" - fits Mercedes-Benz Sprinter AWD 2500 3500 applications where the listed fitment details match.
Is this product vehicle-specific?
This is a vehicle-specific suspension system for Mercedes-Benz Sprinter AWD 2500 3500. Confirm the listed model, year range, configuration, measurements, and installation requirements before ordering.
What should I verify before ordering?
Confirm vehicle model, year range, drivetrain/configuration, wheelbase, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before checkout.
What installation details matter?
Confirm vehicle model, year range, drivetrain/configuration, wheelbase, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Review these listing notes before installation: Need rocker guards for your Mercedes Sprinter AWD (2023+)? The VVan Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170" adds functional protection, chassis rigidity and ease of access to your 170" wheelbase AWD Sprinter in sleek style with a set of Van Compass Rocker Guards. Our signature stealth design cues create an attractive 4" wide step to make getting in and out of your van more convenient, and the rear portion features an additional 1" of width for additional protection on tight trails. This robust design offers excellent body protection and adds easy to access vehicle lifting points. Integrated Hi-Lift jack slots make off-road recovery or flat tire changes go quickly and safely. The main step surfaces are constructed from 1/8" steel and attach to the pinch seam with stainless steel hardware. Frame mounts are constructed from 3/16" steel and are attached in three locations directly to the vehicle's chassis. This additional reinforcement not only ensures a safe and solid mounting location, but increases torsional rigidity in the chassis of the vehicle. Drilling of holes at the pinch seam and under body gussets are required for installation. ** NOT COMPATIBLE with Winnebago Boldt, water tanks are in the way ** Use professional installation when suspension setup, safety-critical hardware, or vehicle weight needs to be verified.
Who is this product best for?
This suspension system is intended for Mercedes-Benz Sprinter camper van conversions, RV upgrades, overland builds, and mobile installations where the listed fitment details match.
Campervan HQ fitment guide
Van Compass 2023+ Mercedes Sprinter 170" - AWD Rocker Guards for camper van and RV builds
Van Compass 2023+ Mercedes Sprinter 170" - AWD Rocker Guards supports Sprinter applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Fits Mercedes-Benz Sprinter AWD 2500 3500. Confirm vehicle model, year range, drivetrain/configuration, wheelbase, loaded vehicle weight, wheel offset/backspacing, clearances, suspension setup before ordering. Product listing notes: Need rocker guards for your Mercedes Sprinter AWD (2023+)? The VVan Compass Mercedes Sprinter AWD (2023+) Rocker Guards Wheelbase 170" adds functional protection, chassis rigidity and ease of access to your 170" wheelbase AWD Sprinter in sleek style with a set of Van Compass Rocker Guards. Our signature stealth design cues create an attractive 4" wide step to make getting in and out of your van more convenient, and the rear portion features an additional 1" of width for additional protection on tight trails. This robust design offers excellent body protection and adds easy to access vehicle lifting points. Integrated Hi-Lift jack slots make off-road recovery or flat tire changes go quickly and safely. The main step surfaces are constructed from 1/8" steel and attach to the pinch seam with stainless steel hardware. Frame mounts are constructed from 3/16" steel and are attached in three locations directly to the vehicle's chassis. This additional reinforcement not only ensures a safe and solid mounting location, but increases torsional rigidity in the chassis of the vehicle. Drilling of holes at the pinch seam and under body gussets are required for installation. ** NOT COMPATIBLE with Winnebago Boldt, water tanks are in the way **
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds
Van Compass 2023+ Mercedes Sprinter 170" - AWD Rocker Guards
