VWD Universal Awning Bunk Window (AW3310)
Pickup available at Denver Warehouse - Will Call
Usually ready in 24 hours
VWD Universal Awning Bunk Window (AW3310) is a flat, crank-out awning bunk window that tilts open for ventilation in a camper van. It has solar privacy glass and installs with a clamp ring.
The window tilts out 3 in., leaving a 31-1/4 in. x 8-1/4 in. opening for airflow, and the screen is removable.
Note: Driver side placement is recommended. This window is not recommended for passenger side rear quarter sections because of sliding door interference. Driving with the window open is not recommended and voids the warranty.
Key Features: VWD Universal Awning Bunk Window (AW3310)
Details that matter when choosing a bunk window:
- Solar privacy glass with a 17% UV rating
- Matte black powder coat frame
- Upgraded 3M UV-coated foam seal for longevity and a weather-tight fit
- Clamp-ring installation with a 1/8 in. clamp ring
- Universal fit for all van models
- 1 year manufacturer warranty
What's Included?
- Awning bunk window with removable screen
- Gasket
- Clamp ring
- Screws
Specifications: VWD Universal Awning Bunk Window (AW3310)
| Outside Frame Dimensions | 34-3/4 in. x 11-3/4 in. |
| Cutout Dimensions | 33-5/8 in. x 10-5/8 in. |
| Ventilation Opening | 31-1/4 in. x 8-1/4 in. |
| Tilt-Out Distance | 3 in. |
| Glass | Solar privacy glass |
| UV Rating | 17% |
| Frame | Matte black powder coat |
| Screen | Removable |
| Installation Type | Clamp ring |
| Clamp Ring Size | 1/8 in. |
| Weight | 15 lbs |
| Country of Origin | China |
| Manufacturer Warranty | 1 year |
| Alternative To | CRL AW1033 |
| Manufacturer Part Number | AW3310 |
Installation Guide: VWD Universal Awning Bunk Window (AW3310)
A clamp-in install needs the following in addition to the window, gasket, clamp ring, and screws:
- Bunk window template
- Drill and metal drill bits (1/8 in. max)
- Phillips screwdriver (hand-tighten all screws)
- Step bit (3/8 in. to 1/2 in. at least)
- Jigsaw with fine metal blade
- Foam or bristle paint brush
- Auto paint/primer
- Plastic or paper drop cloths
- Blue painter's tape
- Safety gear: gloves, eye protection, hearing protection, face mask, long-sleeved shirt
See the Van Windows Direct AW3310 Clamp-In Bunk Window Install Guide for a walkthrough of installing clamp-in bunk windows.
Video: VWD Universal Awning Bunk Window (AW3310)
This video shows a guideline for installing clamp-in windows with 1/8 in. clamp rings. The same method can be applied to almost any clamp-in window, but measure your clamp ring inner dimensions and compare them to your template before making the cutout.
Vehicle fitment
- Product type
- Camper van window
- Vehicle
- Camper vans, RVs, trailers, and overland builds
- Side
- Driver side
- Window position
- Sliding door
- Window type
- Opening window
- Opening style
- T-vent
- Screen
- This is an opening window with a screen.
- Install type
- Clamp-in
- Summary
- Fits Camper vans, RVs, trailers, and overland builds. Confirm side, window position, cutout dimensions, install type, opening style, wall thickness before ordering. Not recommended to install on passenger side rear quarter sections due to sliding door interference. Recommended for driver side only. Not recommended to drive with window open(voids warranty).. Window type: Opening window.
- Install requirements
- This is a clamp-in window installation that only requires the window. Confirm the cutout, clamp ring fit, and mounting clearances before ordering. See the Clamp-in van window install guide.
Fitment FAQ
What does this VWD Universal Awning Bunk Window (AW3310) fit?
This VWD Universal Awning Bunk Window (AW3310) fits Camper vans, RVs, trailers, and overland builds.
Is this product vehicle-specific?
This universal-fit window can be installed in suitable camper van, RV, trailer, truck camper, and overland applications when the installer confirms placement, structure, cutout, wall thickness, and clearances.
What should I verify before ordering?
Confirm side, window position, cutout dimensions, install type, opening style, wall thickness before checkout.
What installation details matter?
This is a clamp-in window installation that typically requires only the window. Confirm the factory cutout or installer-cut opening, wall thickness, trim ring, and clearances before ordering.
Who is this product best for?
This camper van window is intended for universal camper van, RV, trailer, truck camper, and overland window installations where the installer confirms dimensions and placement.
Do Campervan HQ van windows come with instructions?
Most van windows are sold for DIY van builders and may not include manufacturer instructions because many manufacturers assume installation by someone familiar with van window installation. Check the Campervan HQ van window installation blog for guidance. For CR Laurence van windows, you can also search YouTube for CR Laurence window install videos.
Do van windows require adhesive and primer?
This is a clamp-in van window. Clamp-in windows do not require primer or urethane adhesive because they seal against the van body with weatherstripping, an exterior compression ring, foam gasket tape where specified, or an interior trim ring. You still need an existing opening, so cargo vans without windows require the correct cutout before installation.
Do Campervan HQ van windows ship for free?
Most van windows do not ship free because large windows often require truck freight or special handling. When available, warehouse pickup can reduce or refund shipping costs. For large multi-item orders, contact Campervan HQ for an individual quote.
What should I check when a van window is delivered?
Inspect the window shipment before the delivery driver leaves. If there is damage, have the driver note it on the Bill of Lading and provide a signed copy. Without signed damage notation at delivery, Campervan HQ may not be able to make a shipping damage claim.
What is the return process for damaged or defective van windows?
For delivery damage, Campervan HQ needs a signed Bill of Lading showing the damage and photos of the damage. For a defective van window, Campervan HQ needs photos of the defect and will request a Return Authorization. In either case, re-package the window in the original box and tape the invoice number or return authorization number to the outside of the box.
Campervan HQ fitment guide
VWD Universal Awning Bunk Window (AW3310) fitment and installation guide
This universal-fit window is for camper vans, RVs, trailers, truck campers, and overland builds when the installer confirms install method, opening style, screen details, placement, structure, cutout, and wall thickness.
Why choose this product?
- Universal-fit camper van window for installer-confirmed applications
- RV, trailer, truck camper, and overland builds require matching dimensions and wall thickness
- Window operation and install type define the installation requirements
Installation context
- This is a clamp-in window installation that only requires the window
- Factory cutout or installer-cut opening dimensions must match the window
- Side, window position, roof height, and wheelbase must match before installation
Compatibility notes
Fits Camper vans, RVs, trailers, and overland builds. Confirm side, window position, cutout dimensions, install type, opening style, wall thickness before ordering. Not recommended to install on passenger side rear quarter sections due to sliding door interference. Recommended for driver side only. Not recommended to drive with window open(voids warranty).. Window type: Opening window.
Common use cases
- Universal camper van window upgrades
- Camper van ventilation and visibility
- RV window, trailer, truck camper, and overland build projects
VWD Universal Awning Bunk Window (AW3310)
