Flarespace 2007+ Mercedes Sprinter 170" Full Flares
Typically ships in 3-4 weeks.
Looking to sleep sideways in your Mercedes Sprinter 170"WB camper van? These Flarespace 2007+ Mercedes Sprinter 170" Full Flares replace the stock rear upper body panels in your Sprinter, providing extra lateral space to enable you to sleep sideways in your campervan. Install these Flarespace flares and you'll be able to have over 80" wide sleeping platform and a very comfortable night's sleep, without interfering with any of the doors on the van.
Note: Flares are only sold in pairs (one passenger-side, one driver-side), flares are not sold individually. The FS1033 Awning window is compatible with the passenger side Flare and the passenger side sliding cargo door for 170" models!
Shipping on this item is $99. Not compatible with vans that have factory or aftermarket middle windows(example: VWD Middle window listing).
Key Features: Flarespace 2007+ Mercedes Sprinter 170" Full Flares
- Flares are designed to fit the rear quarter factory window cutouts on low-roof or high-roof 2007+ Mercedes Sprinter 170"WB vans.
- Flares are made of polyester resin (fiberglass)
- Package comes with two unpainted flares, approved 3M installation materials, and detailed installation instructions
- Full Flare models add extra width to the rear of your Sprinter campervan, increasing bed length over 80" wide
- Flarespace Half Slider Window 1033 or AW1033 Awning Window(choose in menu)
- Detailed installation instructions included.
- Proudly made in the USA by Flarespace.
- 1-Year limited warranty
All Flarespace sales may be canceled within 24 hours of ordering. Fiberglass products may not be returned, exchanged or canceled after 24 hours. All other Flarespace products may be evaluated for exchange or return on a case by case basis.
What's Included?
(1) Passenger Side Flare
(1) Driver Side Flare
(2) Tubes of Approved Adhesive for Install
Your selected windows(choose in menu)
Installation Instructions
Documents: Flarespace 2007+ Mercedes Sprinter 170" Full Flares
Written Installation Instructions
Video Installation Instructions
FAQ: Flarespace 2007+ Mercedes Sprinter 170" Full Flares
- How are they installed? Your installer will paint your flares to match the color of your Sprinter van. The rear quarter panel is cut out along the factory lines, with the same size cut out as a window. The flares are glued in using the supplied 3M adhesive and sealant. Installers are supplied with detailed step-by-step instructions, including a video and written instructions. Installation takes about 4 hours, plus a day to cure.
- Does the sliding door need to be modified? The stock Sprinter sliding door will open fully without modifications. This also applies for slider doors with CR Laurence windows and T-vent window knobs.
- Will the rear doors still open 270 degrees? If you install an extended door stopper on the rear door, the Sprinter's rear doors can still be opened fully without touching the flares.
Specifications: Flarespace 2007+ Mercedes Sprinter 170" Full Flares
| Height (in.) | 27.6" |
| Width (in.) | 64" |
| Depth (in.) | Passenger: 2.875" / Driver: 4.375" |
| Weight (lbs.) | 40lbs (pair of flares, boxed) |
| Material | Polyester resin (fiberglass), 300-grit gelcoat surface, ready for paint |
Videos: Flarespace 2007+ Mercedes Sprinter 170" Full Flares
Vehicle fitment
- Product type
- Camper van window
- Vehicle
- Mercedes-Benz Sprinter
- Wheel
base - 170"WB
- Roof height
- Low roof and High roof
- Side
- Driver side
- Window position
- Sliding door
- Window type
- Opening window
- Opening style
- Half-slider
- Screen
- This is an opening window. The product listing does not state that a screen is included.
- Summary
- Fits Mercedes-Benz Sprinter. Confirm vehicle model, year range, wheelbase, roof height, side, window position, cutout dimensions, install type, opening style before ordering. Product listing notes: Note: Flares are only sold in pairs (one passenger-side, one driver-side), flares are not sold individually. The FS1033 Awning window is compatible with the passenger side Flare and the passenger side sliding cargo door for 170" models! Shipping on this item is $99. Not compatible with vans that have factory or aftermarket middle windows(example: VWD Middle window listing). Flares are designed to fit the rear quarter factory window cutouts on low-roof or high-roof 2007+ Mercedes Sprinter 170"WB vans. Window type: Opening window.
- Install requirements
- Confirm whether this window is clamp-in or bonded/glue-in before ordering. Glue-in windows require urethane adhesive, primer unless using primerless adhesive, and trim lock sized for the total window circumference.
- Fitment exceptions
- This window fits the listed Mercedes-Benz Sprinter generation, wheelbase, side, and position.
Fitment FAQ
What does this Flarespace 2007+ Mercedes Sprinter 170" Full Flares fit?
This Flarespace 2007+ Mercedes Sprinter 170" Full Flares fits Mercedes-Benz Sprinter applications where the listed fitment details match.
Is this product vehicle-specific?
This window fits Mercedes-Benz Sprinter. Confirm side, position, wheelbase, roof height, generation, install type, and window operation before ordering.
What should I verify before ordering?
Confirm vehicle model, year range, wheelbase, roof height, side, window position, cutout dimensions, install type, opening style before checkout.
What installation details matter?
Confirm whether this is a clamp-in or bonded/glue-in installation. Confirm cutout dimensions, wall thickness, trim requirements, and clearances before ordering.
Who is this product best for?
This camper van window is intended for cargo van window upgrades.
Do Campervan HQ van windows come with instructions?
Most van windows are sold for DIY van builders and may not include manufacturer instructions because many manufacturers assume installation by someone familiar with van window installation. Check the Campervan HQ van window installation blog for guidance. For CR Laurence van windows, you can also search YouTube for CR Laurence window install videos.
Do van windows require adhesive and primer?
Van windows are generally either bonded/glue-in or clamp-in. Bonded windows require urethane adhesive and primer unless a primerless adhesive is specified. Clamp-in windows typically do not require primer or adhesive. Both styles require an existing opening, so cargo vans without windows require the correct cutout before installation.
Do Campervan HQ van windows ship for free?
Most van windows do not ship free because large windows often require truck freight or special handling. When available, warehouse pickup can reduce or refund shipping costs. For large multi-item orders, contact Campervan HQ for an individual quote.
What should I check when a van window is delivered?
Inspect the window shipment before the delivery driver leaves. If there is damage, have the driver note it on the Bill of Lading and provide a signed copy. Without signed damage notation at delivery, Campervan HQ may not be able to make a shipping damage claim.
What is the return process for damaged or defective van windows?
For delivery damage, Campervan HQ needs a signed Bill of Lading showing the damage and photos of the damage. For a defective van window, Campervan HQ needs photos of the defect and will request a Return Authorization. In either case, re-package the window in the original box and tape the invoice number or return authorization number to the outside of the box.
Campervan HQ fitment guide
Flarespace 2007+ Mercedes Sprinter 170" Full Flares fitment and installation guide
This camper van window is for vehicle-specific cargo van window applications. Confirm the listed van model, year range, side, window position, install method, opening style, and screen details before ordering.
Why choose this product?
- Cargo van window upgrade for the listed van model
- Fitment is based on side, position, wheelbase, roof height, and generation
- Window operation and install type define the installation requirements
Installation context
- Install type must be confirmed as clamp-in or bonded/glue-in
- Glue-in windows need the window, urethane adhesive, primer unless primerless, and trim lock
- Side, position, opening style, and screen details must match before installation
Compatibility notes
This window fits the listed Mercedes-Benz Sprinter generation, wheelbase, side, and position.
Common use cases
- Cargo van window upgrades
- Camper van ventilation and visibility
- Vehicle-specific window replacement planning
Flarespace 2007+ Mercedes Sprinter 170" Full Flares
