RB Components TPO Flooring - Coin
- State-of-the-art technology advanced TPO (thermoplastic polyolefin) flooring membrane
- Versatile enough to meet almost any interior or exterior application requiring resistance to weather, chemicals and traffic.
- Black or Gray nickel plate design
- Stocked in 97" wide roll and sold per linear foot (97" x 12") individual
- Or purchase in pre-cut lengths per van size (see below). Sheets come slightly oversized so you can trim wheel wells and overall length to correct sizing.
- Save 10% on TPO Coin Adhesive (#61511) when added to your flooring order. *Not Valid with any other discounts*
| Sold by Linear Foot | 97" wide x 12" long (just add qty to cart) |
| Sprinter 144 | 72" wide x 146" long (12ft) |
| Sprinter 170 | 72" wide x 174" long (14'6"ft) |
| Sprinter 170 EX | 72" wide x 190" long (15'10" ) |
What's So Amazing?
Décor TPO is highly chemical resistant to gasoline, diesel fuel, antifreeze, battery acid, engine oil, transmission fluid, brake fluid, cleansers and many other common chemicals.
It meets all safety regulation criteria for Federal Motor Vehicle Safety Standard (FMVSS) #302 Certification. Unlike competitive vinyl (PVC) membrane products, the TPO will not emit toxic fumes when burnt.
Décor TPO has excellent weathering characteristics, durability and mechanical performance with inherent UV stability and skid resistance. This makes it a tremendous high traffic and extreme exposure membrane.
It does not emit any notable odor commonly experienced with competitive rubber-based membranes.
TPO flooring incorporates a spun polyester (fleece) backing, which is mechanically attached during the extrusion manufacturing process. This backing enables TPO flooring to be easily bonded to a variety of porous wood surfaces. Alpha Systems 3080 TPO Flooring Adhesive is recommended for bonding TPO flooring.
Installation Instructions:
Alpha Systems 3080 TPO Flooring Adhesive may be applied with brush, roller or trowel. Surface should be free of dirt, oil, or other contaminants. Apply a coat of adhesive to one surface (16-20 mils thick). Mate the two surfaces as soon as possible (approx. open time 5-10 minutes. Use a 70 lb. linoleum roller (or equivalent) to apply pressure so that adhesive can properly penetrate into the fleece.
IMMEDIATELY following the adhesive application and rolling process mechanically fasten the perimeter of the TPO flooring.
Technical Information Click Here
Vehicle fitment
- Product type
- Electrical system component
- Vehicle
- Camper vans, RVs, trailers, and mobile builds
- Summary
- Camper vans, RVs, trailers, and mobile builds that need a compatible electrical system component. Confirm voltage, amperage, wire sizing, mounting location, service access before ordering. Product listing notes: Or purchase in pre-cut lengths per van size (see below). Sheets come slightly oversized so you can trim wheel wells and overall length to correct sizing. Save 10% on TPO Coin Adhesive (#61511) when added to your flooring order. *Not Valid with any other discounts* TPO flooring incorporates a spun polyester (fleece) backing, which is mechanically attached during the extrusion manufacturing process. This backing enables TPO flooring to be easily bonded to a variety of porous wood surfaces. Alpha Systems 3080 TPO Flooring Adhesive is recommended for bonding TPO flooring.
Fitment FAQ
What does this RB Components TPO Flooring - Coin fit?
This RB Components TPO Flooring - Coin fits Camper vans, RVs, trailers, and mobile builds.
Is this product vehicle-specific?
This electrical system component is not tied to one van generation. Fit depends on measurements, installation requirements, and the build layout.
What should I verify before ordering?
Confirm voltage, amperage, wire sizing, mounting location, service access before checkout.
What installation details matter?
Confirm voltage, amperage, wire sizing, mounting location, service access before ordering. Use professional installation when safety-critical, structural, electrical, fuel, water, or suspension work needs to be verified.
Who is this product best for?
This electrical system component is intended for camper van conversions, RV upgrades, overland builds, and mobile installations where the product specifications match the build.
Campervan HQ fitment guide
RB Components TPO Flooring - Coin for camper van and RV builds
RB Components TPO Flooring - Coin supports Camper vans, RVs, trailers, and mobile builds applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Camper vans, RVs, trailers, and mobile builds that need a compatible electrical system component. Confirm voltage, amperage, wire sizing, mounting location, service access before ordering. Product listing notes: Or purchase in pre-cut lengths per van size (see below). Sheets come slightly oversized so you can trim wheel wells and overall length to correct sizing. Save 10% on TPO Coin Adhesive (#61511) when added to your flooring order. *Not Valid with any other discounts* TPO flooring incorporates a spun polyester (fleece) backing, which is mechanically attached during the extrusion manufacturing process. This backing enables TPO flooring to be easily bonded to a variety of porous wood surfaces. Alpha Systems 3080 TPO Flooring Adhesive is recommended for bonding TPO flooring.
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds
RB Components TPO Flooring - Coin
