Aluminess 2015-2019 Ford Transit Front Winch Bumper
Need to protect the front end of your Ford Transit camper van? Our Aluminess 2015-2019 Ford Transit Front Winch Bumper protects your van from damage, and includes a winch mount to get you out of any sticky situations.
It also can provide vital protection against wandering creatures, with the optional brush guards. With the brush guards to add frontal grille and side protection, you'll be prepared for the unpredictable.
Note: Winch, driving lights and other accessories sold separately. Requires cut outs for front sensors. Message us before/after you place the order and let us know if you need them cut out.
Key Features: Aluminess 2015-2019 Ford Transit Front Winch Bumper
- Fits 2015-2019 Ford Transit van models
- A lightweight aluminum bumper also means that you don’t lose precious fuel mileage or payload capacity.
- High-strength 5/16″ 6061-T6 aluminum alloy is used for the bumper structure, and 3/16″ 5052-H32 aluminum alloy for the base and non-structural area. This alloy is the same used for the upper & lower receiver of AR-15 rifles, aircraft wings & fuselages, and helicopter rotors, among many other uses. It has an ultimate tensile strength of over 42,000 pounds per square inch.
- The Ford Transit van front winch bumper can house most 9,000 pound winches without an integrated solenoid, and some compact 12,000 pound winches like the Warn Zeon 12/12S.
- The built-in tow hooks make it great for vehicle recovery
- This bumper can come with or without brush guards. Burly brush guards protect your van from branches and wildlife.
If you want to mount lights on the brush guards, note that they use 2" tubing for the center bar and 1.5" tubing under the headlights, so you'll want the Rigid 2" vertical or Rigid 2" horizontal bar mounts.
Note: Does not fit the 2020+ Ford Transit models. All Aluminess products are made to order, and this item typically takes about 8-10 weeks build time. We'll let you know if there is stock or the current lead time when you order. Because these bumpers are large and bulky, freight shipping is required and calculated at checkout.
Sensor holes drilled upon request. Please leave a note on the order at checkout or email us prior to ordering so we can note with Aluminess.
Documents: Aluminess 2015-2019 Ford Transit Front Winch Bumper
Aluminess 2015-2019 Ford Transit Front Winch Bumper Install Instructions- Without Brush Guards
Specifications: Ford Transit Front Winch Bumper (2015-2019)
Shipping Dimensions
|
Height
|
36 IN.
|
|
Width
|
87 IN.
|
|
Depth
|
48 IN.
|
|
Weight
|
220 LBS.
|
Video: Ford Transit Front Winch Bumper (2015-2019)
Vehicle fitment
- Product type
- Bumper
- Vehicle
- Ford Transit
- Years
- 2015-2019
- Summary
- Fits 2015-2019 Ford Transit. Confirm vehicle model, year range, measurements, mounting location, clearances, installation requirements before ordering. Product listing notes: Need to protect the front end of your Ford Transit camper van? Our Aluminess 2015-2019 Ford Transit Front Winch Bumper protects your van from damage, and includes a winch mount to get you out of any sticky situations. Note: Winch, driving lights and other accessories sold separately. Requires cut outs for front sensors. Message us before/after you place the order and let us know if you need them cut out. Fits 2015-2019 Ford Transit van models
Fitment FAQ
What does this Aluminess 2015-2019 Ford Transit Front Winch Bumper fit?
This Aluminess 2015-2019 Ford Transit Front Winch Bumper fits 2015-2019 Ford Transit applications where the listed fitment details match.
Is this product vehicle-specific?
This is a vehicle-specific bumper for 2015-2019 Ford Transit. Confirm the listed model, year range, configuration, measurements, and installation requirements before ordering.
What should I verify before ordering?
Confirm vehicle model, year range, measurements, mounting location, clearances, installation requirements before checkout.
What installation details matter?
Confirm vehicle model, year range, measurements, mounting location, clearances, installation requirements before ordering. Use professional installation when safety-critical, structural, electrical, fuel, water, or suspension work needs to be verified.
Who is this product best for?
This bumper is intended for Ford Transit camper van conversions, RV upgrades, overland builds, and mobile installations where the listed fitment details match.
Campervan HQ fitment guide
Aluminess 2015-2019 Ford Transit Front Winch Bumper for camper van and RV builds
Aluminess 2015-2019 Ford Transit Front Winch Bumper supports Transit applications where fitment, measurements, installation requirements, and build layout should be confirmed before ordering.
Why choose this product?
- Supports camper van, RV, and mobile build planning
- Helps confirm measurements, installation needs, and clearances before checkout
- Useful for matching the product to the build layout before ordering
Installation context
- Confirm measurements and clearances
- Review wiring, mounting, sealant, or material requirements where relevant
- Use professional installation when the build requires it
Compatibility notes
Fits 2015-2019 Ford Transit. Confirm vehicle model, year range, measurements, mounting location, clearances, installation requirements before ordering. Product listing notes: Need to protect the front end of your Ford Transit camper van? Our Aluminess 2015-2019 Ford Transit Front Winch Bumper protects your van from damage, and includes a winch mount to get you out of any sticky situations. Note: Winch, driving lights and other accessories sold separately. Requires cut outs for front sensors. Message us before/after you place the order and let us know if you need them cut out. Fits 2015-2019 Ford Transit van models
Common use cases
- Camper van conversions
- RV upgrades
- Trailer and overland builds
Aluminess 2015-2019 Ford Transit Front Winch Bumper
