WFCO WF-8930 Distribution Panel

$ 199.99

Sold out

Model

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

If you are building or retrofitting an RV with many AC circuits and need an AC/DC distribution panel for 30A or 50A shore power, consider the WFCO WF-8930 Distribution Panel. The 8930/50 Series can be a 50 Amp or 30 Amp AC distribution center, with slightly different capabilities in either configuration:

30A - 30A AC main with 7 AC branch circuits
50A - 50A AC main with 12 AC branch circuits

In both configurations, it can accommodate 15 DC circuits (13 20A circuits and 2 30A circuits).

We carry three versions of this panel (select the version you want using the drop-down menu above):

WF-8930/50NP - Brown panel and door
WF-8930/50NPB - Black panel and door
WF-8930/50NPB-30 - Black panel and door, with one stab bar removed for use with 30 amp service only.

Important: This panel is not ignition-protected, and should not be installed in a compartment with batteries or any LP gas.

Want to save shipping costs? Use the discount code PORTLANDPICKUP when you order and pick up from our Portland, Oregon warehouse and you won't pay any shipping costs.

Key Features: WFCO WF-8930 Distribution Panel

Flexible: can be 30A or 50A distribution center
Built-in standard protection for over-current, over-temperature, over-voltage, reverse polarity
Two-piece, includes door with window
LED warning lights provide visible warning for open circuits
Built-in terminal bars for negative DC wiring
Built-in strain reliefs in cabinet back (suitable for 10/2-14/2 Romex)
Integrates with any of WFCO's deck-mount RV converters
Rear-mounted AC 15A or 20A receptacle, allowing easy converter plug-in for power
DC circuits are fused with ATC blade-style fuses
Main AC circuits (30A/50A 120/240VAC) and branch circuits (20A 120/240VAC) use 1" single-pole circuit breakers
UL and cUL listed
Limited 2-year warranty.

Note: This is a distribution panel only, and does not include a converter or transfer switch, though it can easily pair with a WFCO converter and transfer switch. Circuit breakers and fuses for this panel are sold separately.

Specifications: WFCO WF-8930 Distribution Panel

Input Voltage	120VAC or 240VAC
Input Current	30A or 50A
Outer Dimensions	13 3/4"W x 9 1/2"H x 4"D
Rough Opening	12 3/16"W x 8 3/16"H x 3"D
Weight (lbs.)	3.75
AC Circuits	30A Config: Main 30A, 7 AC branch circuits 50A Config: Main 50A, 12 branch circuits
Compatible AC Circuit Breakers (Main)	Square D HOM, Siemens QP, or Cutler Hammer BR230/ BR250/C250/C230 breakers
Compatible AC Circuit Breakers (Branch)	Square D HOMT, Siemens QP or QT, or Cutler Hammer Bd2020/ A2020 breakers

Documents: WFCO WF-8930 Distribution Panel

WFCO WF-8930 Distribution Panel Installation Manual

WFCO WF-8930 Spec Sheet

Video: WFCO WF-8930 Distribution Panel

Vehicle fitment

Product type: Camper van window
Vehicle: Camper vans, RVs, trailers, and overland builds
Summary: Camper vans, RVs, trailers, and overland builds that need a compatible camper van window. Confirm side, window position, cutout dimensions, install type, opening style before ordering. Product listing notes: Integrates with any of WFCO's deck-mount RV converters Rear-mounted AC 15A or 20A receptacle, allowing easy converter plug-in for power Window type: Confirm listed window operation.
Install requirements: Confirm whether this window is clamp-in or bonded/glue-in before ordering. Glue-in windows require urethane adhesive, primer unless using primerless adhesive, and trim lock sized for the total window circumference.

Fitment FAQ

What does this WFCO WF-8930 Distribution Panel fit?

This WFCO WF-8930 Distribution Panel fits Camper vans, RVs, trailers, and overland builds.

Is this product vehicle-specific?

This universal-fit window can be installed in suitable camper van, RV, trailer, truck camper, and overland applications when the installer confirms placement, structure, cutout, wall thickness, and clearances.

What should I verify before ordering?

Confirm side, window position, cutout dimensions, install type, opening style before checkout.

What installation details matter?

Confirm whether this is a clamp-in or bonded/glue-in installation. Confirm cutout dimensions, wall thickness, trim requirements, and clearances before ordering.

Who is this product best for?

This camper van window is intended for universal camper van, RV, trailer, truck camper, and overland window installations where the installer confirms dimensions and placement.

Do Campervan HQ van windows come with instructions?

Most van windows are sold for DIY van builders and may not include manufacturer instructions because many manufacturers assume installation by someone familiar with van window installation. Check the Campervan HQ van window installation blog for guidance. For CR Laurence van windows, you can also search YouTube for CR Laurence window install videos.

Do van windows require adhesive and primer?

Van windows are generally either bonded/glue-in or clamp-in. Bonded windows require urethane adhesive and primer unless a primerless adhesive is specified. Clamp-in windows typically do not require primer or adhesive. Both styles require an existing opening, so cargo vans without windows require the correct cutout before installation.

Do Campervan HQ van windows ship for free?

Most van windows do not ship free because large windows often require truck freight or special handling. When available, warehouse pickup can reduce or refund shipping costs. For large multi-item orders, contact Campervan HQ for an individual quote.

What should I check when a van window is delivered?

Inspect the window shipment before the delivery driver leaves. If there is damage, have the driver note it on the Bill of Lading and provide a signed copy. Without signed damage notation at delivery, Campervan HQ may not be able to make a shipping damage claim.

What is the return process for damaged or defective van windows?

For delivery damage, Campervan HQ needs a signed Bill of Lading showing the damage and photos of the damage. For a defective van window, Campervan HQ needs photos of the defect and will request a Return Authorization. In either case, re-package the window in the original box and tape the invoice number or return authorization number to the outside of the box.

Campervan HQ fitment guide