CRL Universal Van Sliding Window Passenger Side (VW1033R)

$ 295.33

Key Features

Designed to fit passenger side of any van model
Cutout dimensions: 10" H × 33" W
28% dark gray factory tint
Detachable screens and pre-applied weatherstripping (no sealant or adhesive needed)
Tempered glass for strength and safety
ANSI Z26.1 & FMVSS 205 certified
Includes 1/8" clamp ring (also acts as trim ring) and self-tapping screws
Some holes come pre-drilled; others may require drilling—this is standard from CR Laurence

Vehicle fitment

Product type: RV window
Vehicle: Universal vans, RVs, Class A/Class B/Class C RVs, truck campers, trailers, and overland builds
Side: Passenger side
Window type: Fixed window
Screen: This is a fixed window and does not include an opening screen.
Install type: Clamp-in
Summary: This is a universal-fit window that can be installed in multiple van window configurations. Installer must confirm placement, structure, cutout, and clearance.
Install requirements: This is a clamp-in window installation that only requires the window. Confirm the cutout, clamp ring fit, and mounting clearances before ordering. See the Clamp-in van window install guide.
Fitment exceptions: This is a universal-fit window that can be installed in multiple van window configurations. The installer must confirm correct position, structure, cutout, and clearances before ordering.

Fitment FAQ

What does this camper van window fit?

This camper van window fits Universal vans, RVs, Class A/Class B/Class C RVs, truck campers, trailers, and overland builds.

Is this product vehicle-specific?

This universal-fit window can be installed in multiple van window configurations when the installer confirms placement, structure, cutout, wall thickness, and clearances.

What should I verify before ordering?

Confirm side, window position, cutout dimensions, install type, opening style, wall thickness, screen status, roof height, wheelbase, and whether this replaces factory glass before checkout.

What installation details matter?

This is a clamp-in window installation that only requires the window. Confirm the cutout, clamp ring fit, and mounting clearances before ordering.

Who is this product best for?

This universal-fit window is intended for camper van window upgrades, RV window projects, trailers, truck campers, Class A/Class B/Class C RVs, and overland builds where the installer confirms fitment, install method, and placement.

Do Campervan HQ van windows come with instructions?

Most van windows are sold for DIY van builders and may not include manufacturer instructions because many manufacturers assume installation by someone familiar with van window installation. Check the Campervan HQ van window installation blog for guidance. For CR Laurence van windows, you can also search YouTube for CR Laurence window install videos.

Do van windows require adhesive and primer?

This is a clamp-in van window. Clamp-in windows do not require primer or urethane adhesive because they seal against the van body with weatherstripping, an exterior compression ring, foam gasket tape where specified, or an interior trim ring. You still need an existing opening, so cargo vans without windows require the correct cutout before installation.

Do Campervan HQ van windows ship for free?

Most van windows do not ship free because large windows often require truck freight or special handling. When available, warehouse pickup can reduce or refund shipping costs. For large multi-item orders, contact Campervan HQ for an individual quote.

What should I check when a van window is delivered?

Inspect the window shipment before the delivery driver leaves. If there is damage, have the driver note it on the Bill of Lading and provide a signed copy. Without signed damage notation at delivery, Campervan HQ may not be able to make a shipping damage claim.

What is the return process for damaged or defective van windows?

For delivery damage, Campervan HQ needs a signed Bill of Lading showing the damage and photos of the damage. For a defective van window, Campervan HQ needs photos of the defect and will request a Return Authorization. In either case, re-package the window in the original box and tape the invoice number or return authorization number to the outside of the box.

Campervan HQ fitment guide

CRL Universal Van Sliding Window Passenger Side (VW1033R) fitment and installation guide

This universal-fit window is for camper vans, RVs, trailers, truck campers, and overland builds when the installer confirms install method, opening style, screen details, placement, structure, cutout, and wall thickness.

Why choose this product?

Universal-fit camper van window for installer-confirmed applications
RV, trailer, truck camper, and overland builds require matching dimensions and wall thickness
Window operation and install type define the installation requirements

Installation context

This is a clamp-in window installation that only requires the window
Factory cutout or installer-cut opening dimensions must match the window
Side, window position, roof height, and wheelbase must match before installation

Compatibility notes

This is a universal-fit window that can be installed in multiple van window configurations. Installer must confirm placement, structure, cutout, and clearance.

Common use cases

Universal camper van window upgrades
Camper van ventilation and visibility
RV window, trailer, truck camper, and overland build projects

Need smaller rear sliding windows for camper vans with rear beds? The CRL Universal Van Sliding Window – Passenger Side (VW1033R) is a sleek, functional option that complements the styling of vans like the Mercedes Sprinter, Ford Transit, Ram Promaster, and Nissan NV.

The VW1033R is a single-pane half-slider window with a horizontally sliding panel and a detachable screen for airflow and bug protection. This clamp-in style window includes pre-applied weatherstripping—no adhesive, brackets, or adapters needed. It installs directly onto your van’s sheet metal for a clean, straightforward fit.

C.R. Laurence offers a limited 30-day warranty to replace or refund any product proven defective in material or workmanship upon inspection. Installation-related issues are not covered under this warranty. For best results, CRL recommends installation by a licensed builder or experienced installer.

NO SHIPPING CHARGES if you pick up your van window at any of the 18 CRL warehouses in the US

Install Info

Notes when mounting your clamp-in van window:

Clamp-in windows can not replace factory glass windows due to the oversized cut-out.
MUST cut window hole to fit clamp ring specifications.
Cut the openings with a center-blade shear, rather than a jigsaw - this will cut an opening that may be less ragged, produce less debris, and produce less hammering on the sheet metal of the van.
Make sure you paint the cut edges of the new window opening - if you skip this step, moisture can rust out the edges of the window mounting.
IMPORTANT: these windows clamp-in place - we recommend you use hand tools to tighten these. DO NOT use power tools on the inner trim ring screws.
See our AW3310 clamp-in install guide for more details.

FAQ

Q1: What is a clamp-in window?

A: A clamp-in window uses an interior clamp ring and exterior frame to secure the window to the van wall—no adhesive or primer required. It’s a popular choice for DIY installs because it’s easier and faster to install than bond-in windows.

Q2: Are clamp-in windows compatible with my van?

A: Yes! Clamp-in windows are available for most popular vans including Ford Transit, RAM ProMaster, and Mercedes Sprinter. Always check product specs to confirm fitment for your specific roof height, wheelbase, and model year.

Q3: What’s the difference between clamp-in and bond-in windows?

A: Clamp-in windows use a mechanical frame and clamp ring to secure the window—no adhesive needed.

Bond-in windows use urethane adhesive for a flush, frameless look. Clamp-in windows are easier to install but may not be as low-profile as bond-in styles.

Q4: Can I install a clamp-in window myself?

A: Yes! Clamp-in windows are ideal for DIY van builders. They don’t require adhesive or curing time and include all hardware for a secure fit. Just be sure to measure carefully and follow cutting instructions closely.

Q5: What tools do I need to install a clamp-in window?

A: Basic tools include:

Jigsaw or body saw with metal blades
Masking tape and marker for layout
File or deburring tool for smoothing edges
Screwdriver for securing clamp ring attachment
No special adhesives or primers are required.

Q6: Is any adhesive or sealant required?

A: Typically, clamp-in windows come with a rubber gasket or foam seal to prevent leaks. You may use a small amount of butyl tape or RV sealant around the frame for extra water resistance, but it’s not always necessary.

Q7: Are clamp-in windows watertight and secure?

A: Yes—when properly installed, clamp-in windows are watertight, wind-resistant, and secure for all weather conditions. Always double-check the gasket alignment during install to ensure a tight seal.

Q8: Can clamp-in windows open for ventilation?

A: Many clamp-in windows include sliding or crank-out panels with built-in bug screens. Others are fixed-pane solid glass. Be sure to check if the model you’re selecting includes ventilation features.

Q9: Can clamp-in windows be installed in vans with no factory windows?

A: Absolutely. Clamp-in windows are designed for cargo vans with solid panels and can be installed after carefully cutting the correct window openings using the included template or manufacturer’s specs.

Q10: Do clamp-in windows meet safety standards?

A: Yes. Most clamp-in windows are made from tempered safety glass and meet applicable safety standards like DOT FMVSS 205 and ANSI Z26.1 for automotive windows.

Product Specs

CRL Universal Van Sliding Window Passenger Side (VW1033R)

Height(in.):	10" cutout, 10.9" overall
Width (in.):	33" cutout, 33.9" overall
Weight (lbs.):	17
Tint:	28% dark gray
Window Type:	Fixed Slider, Screened (Clamp-in)
Fits:	All van models

CRL Universal Van Sliding Window Passenger Side (VW1033R)

Video

Compare CRL Universal Van Sliding Window Passenger Side (VW1033R) with similiar models.

A table comparing the facets of 3 products
Facet	CRL Universal Van Sliding Window Passenger Side (VW1033R) View details	VWD Universal Fit Half-Slider Van Bunk Window Passenger Side 33" W x 10" H (VW3310R) View details	AM Auto Universal-Fit Passenger Side Half-Slider Screened Window 9.4"H x 30.7"W (UBW-RV-HSS P) View details
By
By	C.R. Laurence	Van Windows Direct	AM Auto
Price
Price	$ 295.33	$ 269.95 ~~$ 289.95~~	$ 264.25
Description
Description	Height(in.): 10" cutout, 10.9" overall Width (in.): 33" cutout, 33.9" overall Weight (lbs.): 17 Tint: 28% dark gray Window Type: Fixed...	IN STOCK! Introducing the VWD Universal Fit Half-Slider Van Bunk Window Passenger Side 33" W x 10" H (VW3310R). Featuring a solar...	Height (in.) 9.4 Width (in.) 30.7 Weight (lbs) N/A