VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F)
Pickup available at Denver Warehouse - Will Call
Usually ready in 24 hours
VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F) is a fixed (non-opening) glass window for the driver side middle position of 2007+ Mercedes Sprinter vans. It is designed from OEM specifications, so it uses the factory stampings for placement and the cut-hole for installation.
It fits 2007+ Mercedes Sprinter 170"/170" EXT WB vans (Low Roof / High Roof). Not compatible with Driver Side Sliding Door.
The window is bonded in with urethane. Our How to Install Bonded Van Windows blog article covers what is needed to install a bond-in window, and the video at the bottom of this page shows the process.
Key Features: VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F)
The window is made from tempered single-pane glass with a solar privacy tint.
- Single-pane automotive glass in a fixed design that does not open
- Pure Grey solar privacy glass gives a more natural view out than standard green-base solar privacy glass
- Tempered safety glass that meets or exceeds DOT/SAE standards
- Urethane-bonded installation for an OEM-style, weather-sealed finish
- 1-year warranty
Fitment Guide
MODEL: Mercedes Sprinter
YEAR: 2007+
WHEELBASE: 170"/170" EXT WB
ROOF HEIGHT: Low Roof / High Roof
WINDOW POSITION: Driver Side Middle
Not compatible with Driver Side Sliding Door.
Specifications: VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F)
| Manufacturer | Van Windows Direct |
| Vehicle | Mercedes Sprinter (2007+) |
| Window Position | Driver Side Middle |
| Glass | Pure Grey solar privacy glass, single pane |
| Safety Standard | Tempered safety glass, meets or exceeds DOT/SAE |
| Installation Type | Urethane bonded |
| Warranty | 1 year |
| Window Type | Solid Fixed Glass OE Style Van Window |
| Overall Measurements | 1421 x 767 mm (55.95 x 30.2 in.) |
| Manufacturer Part Number | SL102-F |
Video: VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F)
Vehicle fitment
- Product type
- Van window
- Vehicle
- Mercedes-Benz Sprinter
- Platform
- NCV3 / 906 and VS30 / 907
- Years
- 2007-current
- Wheel
base - 170"WB and 170"EXT
- Roof height
- Low roof
- Side
- Driver side
- Window position
- Middle side position
- Window type
- Fixed window
- Screen
- This is a fixed window and does not include an opening screen.
- Install type
- Bonded window
- Summary
- Fits 2007-current Mercedes-Benz Sprinter vans in 170"WB and 170"EXT high roof and low roof models for the driver-side middle position. This is a bonded fixed window. Confirm this window is installed only in the listed side and position.
- Install requirements
- Glue-in window installation requires the window, urethane adhesive, primer unless using primerless adhesive, and trim lock sized for the total window circumference. See the Bonded van window install guide.
- Fitment exceptions
- This window fits Mercedes-Benz Sprinter NCV3 / 906 and VS30 / 907 van models when the listed year range, wheelbase, side, and position match. NCV3 and VS30 rear door windows use different shapes.
Fitment FAQ
What does this camper van window fit?
This camper van window fits Fits 2007-current Mercedes-Benz Sprinter vans in 170"WB and 170"EXT high roof and low roof models for the driver-side middle position. This is a bonded fixed window. Confirm this window is installed only in the listed side and position..
Is this product vehicle-specific?
This window fits 2007-current Mercedes-Benz Sprinter NCV3 / 906 and VS30 / 907 van models in 170"WB and 170"EXT high roof and low roof models when the listed side and position match. Position-specific Sprinter windows must be installed only in the listed window location.
What should I verify before ordering?
Confirm 2007-current Mercedes-Benz Sprinter fitment, 170"WB and 170"EXT wheelbase, high roof and low roof models, side, middle position, bonded install requirements, and the correct factory stamping or cutout before checkout.
What installation details matter?
Yes. This is a bonded or glue-in fixed van window, so installation requires urethane adhesive and primer. The primer prepares the glass and steel surfaces, and the adhesive fastens the window to the van while sealing out moisture. Bonded windows also need the correct cutout and may require trim lock or a window gasket for the cut metal edge.
Who is this product best for?
This camper van window is intended for cargo van window upgrades.
Do Campervan HQ van windows come with instructions?
Most van windows are sold for DIY van builders and may not include manufacturer instructions because many manufacturers assume installation by someone familiar with van window installation. Check the Campervan HQ van window installation blog for guidance. For CR Laurence van windows, you can also search YouTube for CR Laurence window install videos.
Do van windows require adhesive and primer?
This is a bonded or glue-in van window. Bonded windows require urethane adhesive and primer unless a primerless adhesive is specified. The primer prepares the glass and steel surfaces, and the adhesive fastens the window to the van while sealing out moisture. You still need an existing opening, so cargo vans without windows require the correct cutout before installation.
Do Campervan HQ van windows ship for free?
Most van windows do not ship free because large windows often require truck freight or special handling. When available, warehouse pickup can reduce or refund shipping costs. For large multi-item orders, contact Campervan HQ for an individual quote.
What should I check when a van window is delivered?
Inspect the window shipment before the delivery driver leaves. If there is damage, have the driver note it on the Bill of Lading and provide a signed copy. Without signed damage notation at delivery, Campervan HQ may not be able to make a shipping damage claim.
What is the return process for damaged or defective van windows?
For delivery damage, Campervan HQ needs a signed Bill of Lading showing the damage and photos of the damage. For a defective van window, Campervan HQ needs photos of the defect and will request a Return Authorization. In either case, re-package the window in the original box and tape the invoice number or return authorization number to the outside of the box.
Campervan HQ fitment guide
VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170"/170" EXT WB (SL102-F) fitment and installation guide
This camper van window is for vehicle-specific cargo van window applications. Confirm the listed van model, year range, side, window position, install method, opening style, and screen details before ordering.
Why choose this product?
- Cargo van window upgrade for the listed van model
- Fitment is based on side, position, wheelbase, roof height, and generation
- Window operation and install type define the installation requirements
Installation context
- Bonded or glue-in windows require the window, urethane adhesive, and trim lock
- Use primer unless the adhesive is primerless
- Measure the total window circumference for trim lock length
Compatibility notes
This window fits Mercedes-Benz Sprinter NCV3 / 906 and VS30 / 907 van models when the listed year range, wheelbase, side, and position match. NCV3 and VS30 rear door windows use different shapes.
Common use cases
- Cargo van window upgrades
- Camper van ventilation and visibility
- Vehicle-specific window replacement planning
VWD 2007+ Mercedes Sprinter Driver Side Middle Fixed Window - 170&q...
