ADD A DEDICATED SLEEPING SPACE WITHOUT GIVING UP THE LIVING SPACE INSIDE YOUR SPRINTER
Campervans are designed to make the most of limited space, and adding multi-use function is the best way to maximize your vans capability. Adding or moving sleeping area can completely change how you use the van.
The RoamLabX Sprinter Carbon Fiber Roof Top Tent creates a dedicated sleeping space above the van while preserving the living space below. Engineered specifically for Mercedes-Benz Sprinter high-roof vans, the system combines carbon fiber construction, an insulated PMI structural core, integrated interior access, and a streamlined rooftop design.
The result is more than a rooftop tent. It is an integrated extension of the Sprinter.
SLEEP ABOVE. LIVE BELOW.
Add usable space to your van build without taking it away from the interior.
RoamLabX Rooftop Tent creates a primary or secondary dedicated sleeping space. The tent measures 49.2 × 78.7 inches, while an integrated 27.6 × 17.7 inch entry hatch connects the rooftop sleeping area directly to the van below. That means you can move between spaces without relying on an exterior ladder.
During the day, the van retains its full living area. At night, the rooftop becomes a private sleeping space.
ENGINEERED FOR THE SPRINTER
The RoamLabX Carbon Fiber Roof Top Tent was designed specifically for Mercedes-Benz Sprinter 144-inch and 170-inch wheelbase Sprinters.
The integrated roof rack and tent mounts to the Sprinter factory roof-rails, with the interior entry opening positioned between the first and second ceiling ribs. RoamLabX recommends professional installation, since vehicle configuration and interior finishing can affect the installation process. See our recommended installers below.
CARBON FIBER CONSTRUCTION. LESS ROOFTOP WEIGHT.
The upper and lower shells use carbon fiber face sheets surrounding a closed-cell PMI structural foam core.
The rooftop tent's sandwich construction combines structural stiffness with a lightweight design while also creating a thermal barrier within the roof and sleeping platform. The complete tent system weighs approximately 150 pounds, excluding the roof rack, with final weight varying based on configuration and accessories.
For a rooftop system, keeping weight under control matters. The RoamLabX approach puts structural performance, insulation, and weight reduction into the same system.
ADDED COMFORT ABOVE THE VAN
The rooftop sleeping area is designed as more than an extra bed.
The insulated shells help reduce heat transfer around the sleeping space, while the fabric system incorporates RoamLabX SEAL Stitch Technology. Water-swellable thread helps close the needle-hole pathway when exposed to moisture, while mesh openings provide ventilation and connection to the surrounding environment.
EASY OPENING. EASY CLOSING.
The assisted structure guides the roof into its open position, while integrated fabric management helps organize the fabric as the tent deploys.
To close the tent, pull the roof down, confirm the fabric is contained, and secure the two locking straps.
ACCESS THE ROOFTOP TENT FROM INSIDE THE VAN
Traditional rooftop tents typically require climbing an exterior ladder to get into bed. RoamLabX rooftop tent takes a different approach.
An integrated interior hatch connects the van directly to the rooftop sleeping space. You can access, open, and close the tent from inside the van without an exterior ladder.
This integrated design can be especially valuable for campers who want to maintain a connected interior experience, improve privacy, or avoid carrying an exterior ladder.
DESIGNED AROUND THE WAY YOU BUILD
The RoamLabX rooftop tent is designed to accommodate compatible roof accessories such as solar panels, ventilation fans, and light bars, but roof layouts should be planned carefully before installation. Any modification to the carbon fiber shell should be evaluated and completed by a qualified professional.
For professional builders, planning the rooftop tent early in the build process can help coordinate:
- Solar placement
- Ventilation
- Interior ceiling layout
- Electrical routing
- Entry hatch location
- Roof accessories
- Interior finishing
WHO IS THE ROAMLABX ROOFTOP TENT FOR?
The RoamLabX Carbon Fiber Roof Top Tent is designed for Sprinter owners who want to expand sleeping capacity without sacrificing the living space inside the van.
It can be especially useful for:
FAMILIES AND GROUPS
Add a dedicated sleeping space while keeping the main cabin available for living, cooking, storage, and relaxing.
ADVENTURE TRAVELERS
Create a rooftop retreat while maintaining the functionality of the van below.
PROFESSIONAL VAN BUILDS
Integrate an additional sleeping area into a complete Sprinter build while coordinating the roof and interior systems from the beginning.
OWNERS UPGRADING AN EXISTING SPRINTER
Add sleeping capacity to an existing van while preserving the interior layout.
PREFERRED PROFESSIONAL ROAMLABX INSTALLERS
Find our preferred installer near you:
Carlsbad, California
Fresno, California and Reno, Nevada
Milwaukie, Oregon
Loveland, Colorado
INSTALLATION NOTE: Availability, scheduling, vehicle configuration, and installation requirements can vary. Contact the installer before traveling or ordering to confirm current services and fitment.
The RoamLabX Sprinter Carbon Fiber Roof Top Tent changes the way a Sprinter can be used.
With a dedicated sleeping space above, your living space below stays open. Carbon fiber and PMI construction help keep rooftop weight controlled, while integrated insulation, interior access, and weather-conscious construction create a more connected camping experience.
Add more room and expand your van living space easily with this epic upgrade.
