C.R. Laurence

CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window

$ 516⁹⁹

Key Features

Designed to fit driver side middle of 2007+ Mercedes Sprinter 170"WB models
Has 28% dark gray factory tint
Uses tempered glass for maximum safety and strength
Is tested to ANSI Z26.1 and FMVSS 205 safety standards
Uses factory stampings for cut lines
Is manufactured in the USA by CR Laurence.

Vehicle fitment

Product type: Van window
Vehicle: Mercedes-Benz Sprinter
Platform: NCV3 / 906 and VS30 / 907
Years: 2007-current
Wheelbase: 170 and 170 EXT wheelbases where the listed position applies
Roof height: Medium and high roof
Side: Driver side
Window position: Middle side position
Window type: Fixed window
Install type: Clamp-in
Summary: Fits Mercedes-Benz Sprinter van window applications for the listed generation, wheelbase, side, and position. Rear door windows must match NCV3 or VS30 generation because the shapes differ.
Install requirements: Clamp-in window installation typically requires only the window.
Fitment exceptions: Sprinter windows must match the correct generation: T1N 2002-2006, NCV3 2007-2018, or VS30 2019-current. NCV3 and VS30 rear door windows are different shapes.

Fitment FAQ

What does this camper van window fit?

This camper van window is mapped for Mercedes-Benz Sprinter 2007-current.

Is this product vehicle-specific?

Mercedes-Benz Sprinter window fitment must match the correct generation: T1N 2002-2006, NCV3 2007-2018, or VS30 2019-current. NCV3 and VS30 rear door windows are different shapes.

What should I verify before ordering?

Confirm Sprinter generation, wheelbase, roof height, side, exact window position, and rear-door generation compatibility before checkout.

What installation details matter?

Clamp-in windows typically require only the window for installation. Confirm cutout, clamp ring fit, and position before ordering.

Who is this product best for?

This camper van window is intended for cargo van window upgrades.

Campervan HQ fitment guide

CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window fitment and installation guide

This van window page is structured to help shoppers verify vehicle generation, side, window position, install method, and opening style before ordering.

Why choose this product?

Supports cargo van window upgrades and camper van conversions
Helps distinguish fixed windows from opening windows
Clarifies clamp-in versus bonded/glue-in installation requirements

Installation context

Clamp-in windows typically require only the window
Confirm the factory cutout or installer-cut opening
Verify side, window position, and roof height before installation

Compatibility notes

Mercedes-Benz Sprinter window fitment must match T1N 2002-2006, NCV3 2007-2018, or VS30 2019-current. NCV3 and VS30 rear door windows are different shapes.

Common use cases

Cargo van window upgrades
Camper van ventilation and visibility
RV, trailer, truck camper, and overland builds

We have CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed Window (FW622L) to complement the sleek styling of the Mercedes Sprinter van. Our windows are configured to fit within the OEM stampings and provide a customized OEM look. This great feature eliminates the time-consuming efforts of laying out where the window will be installed.

NO SHIPPING CHARGES if you pick up your van window at any of the 18 CRL warehouses in the US

Install Info

Notes when mounting your clamp-in van window:

Clamp-in windows can not replace factory glass windows due to the oversized cut-out.
MUST cut window hole to fit clamp ring specifications.
Cut the openings with a center-blade shear, rather than a jigsaw - this will cut an opening that may be less ragged, produce less debris, and produce less hammering on the sheet metal of the van.
Make sure you paint the cut edges of the new window opening - if you skip this step, moisture can rust out the edges of the window mounting.
IMPORTANT: these windows clamp-in place - we recommend you use hand tools to tighten these. DO NOT use power tools on the inner trim ring screws.
See our AW3310 clamp-in install guide for more details.

FAQ

Q1: What is a clamp-in window?

A: A clamp-in window uses an interior clamp ring and exterior frame to secure the window to the van wall—no adhesive or primer required. It’s a popular choice for DIY installs because it’s easier and faster to install than bond-in windows.

Q2: Are clamp-in windows compatible with my van?

A: Yes! Clamp-in windows are available for most popular vans including Ford Transit, RAM ProMaster, and Mercedes Sprinter. Always check product specs to confirm fitment for your specific roof height, wheelbase, and model year.

Q3: What’s the difference between clamp-in and bond-in windows?

A: Clamp-in windows use a mechanical frame and clamp ring to secure the window—no adhesive needed.

Bond-in windows use urethane adhesive for a flush, frameless look. Clamp-in windows are easier to install but may not be as low-profile as bond-in styles.

Q4: Can I install a clamp-in window myself?

A: Yes! Clamp-in windows are ideal for DIY van builders. They don’t require adhesive or curing time and include all hardware for a secure fit. Just be sure to measure carefully and follow cutting instructions closely.

Q5: What tools do I need to install a clamp-in window?

A: Basic tools include:

Jigsaw or body saw with metal blades
Masking tape and marker for layout
File or deburring tool for smoothing edges
Screwdriver for securing clamp ring attachment
No special adhesives or primers are required.

Q6: Is any adhesive or sealant required?

A: Typically, clamp-in windows come with a rubber gasket or foam seal to prevent leaks. You may use a small amount of butyl tape or RV sealant around the frame for extra water resistance, but it’s not always necessary.

Q7: Are clamp-in windows watertight and secure?

A: Yes—when properly installed, clamp-in windows are watertight, wind-resistant, and secure for all weather conditions. Always double-check the gasket alignment during install to ensure a tight seal.

Q8: Can clamp-in windows open for ventilation?

A: Many clamp-in windows include sliding or crank-out panels with built-in bug screens. Others are fixed-pane solid glass. Be sure to check if the model you’re selecting includes ventilation features.

Q9: Can clamp-in windows be installed in vans with no factory windows?

A: Absolutely. Clamp-in windows are designed for cargo vans with solid panels and can be installed after carefully cutting the correct window openings using the included template or manufacturer’s specs.

Q10: Do clamp-in windows meet safety standards?

A: Yes. Most clamp-in windows are made from tempered safety glass and meet applicable safety standards like DOT FMVSS 205 and ANSI Z26.1 for automotive windows.

Product Specs

CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window

Height (in.):	54
Width (in.):	30
Weight (lbs.):	30
Tint:	28% Dark Gray
Window Type:	Fixed (Clamp-in)

CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window

Video

Compare CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window with similiar models.

A table comparing the facets of 3 products
Facet	CRL Mercedes Sprinter 170"WB Driver's Side Middle Fixed (FW622L) Window View details	VWD Mercedes Sprinter Van Fixed Window 2007+ Driver Side Middle (SL102-F) View details	AM Auto Mercedes Sprinter (2007+) Driver Side Middle Fixed Window 170"WB (MS06-L2L P) View details
By
By	C.R. Laurence	Van Windows Direct	AM Auto
Price
Price	$ 516⁹⁹	$ 269⁹⁵ ~~$ 299⁹⁵~~	$ 320²³
Description
Description	Height (in.): 54 Width (in.): 30 Weight (lbs.): 30 Tint: 28% Dark Gray Window Type: Fixed (Clamp-in)	Introducing the VWD Mercedes Sprinter Van Fixed Window 2007+ Driver Side Middle (SL102-F). Elevate your van's appearance and functionality with the...	Height (in.) 30.27 Width (in.) 55.98 Weight (lbs) N/A