Flarespace Awning-Style Bunk Window (FS1033 Awning)

Typically ships in 2-3 weeks. 

Need smaller awning-style windows for camper vans with rear beds? The Flarespace Awning-Style Bunk Window (FS1033 Awning) will complement the styling of your camper van, whether it's a Mercedes Sprinter, Ford Transit, Ram Promaster or Nissan NV.

This single-pane glass FS1033 awning window is hinged at the top, and the whole windowpane cranks outwards at the bottom. This window also has a detachable screen. This awning window is a clamp-in style, meaning it has pre-applied weatherstripping, so you don't need any adhesive to install it. Also, it's designed to clamp right onto the sheet metal of your van, no brackets or adapters are necessary.

Want a similar size and shape window but that you can leave open while driving? Check out the FS1033L and FS1033R half-slider windows.

All Flarespace sales may be canceled within 24 hours of ordering. Fiberglass products may not be returned, exchanged or canceled after 24 hours. All other Flarespace products may be evaluated for exchange or return on a case by case basis.

Key Features: Flarespace Awning-Style Bunk Window (FS1033 Awning)

This Awning-Style Bunk Window (FS1033 Awning):

• Is a top-hinged awning-style window, fits either the driver or passenger's side of any van model
• Has cutout dimensions of 10" high x 33" wide
• Has 28% dark gray factory tint
• Has a detachable screen
• It opens 10°
• Comes with pre-applied weatherstripping (no sealant, tape or adhesive needed for install)
• Uses tempered glass for maximum safety and strength
• Is tested to ANSI Z26.1 and FMVSS 205 safety standards
• These windows include a 1/8" clamp ring (which doubles as a trim ring) mounted with screws.

When mounting these windows in your van:

• A template is useful, but not included. Carefully cut the opening according to your template.
• Make sure you paint the cut edges of the new window opening - if you skip this step, moisture can rust out the edges of the window mounting. Also, be careful not to block the weep holes on the bottom of the frame, they let condensation out, again to prevent rust.
• These windows are designed to clamp onto the sheet metal body of the van, they do not require any spacers.
• It is recommended to let the self-tapping screws do their job and bore their own hole. However, pre-drilling with a 1/16" metal drill bit helps get them started and you won't risk damaging the window or screw. In previous install scenarios, pre-drilling and getting the screw started with a drill makes it faster. Finish tightening the screws with a handheld screwdriver to avoid stripping out the hole. 

Specifications: Flarespace Awning-Style Bunk Window (FS1033 Awning)

Outside Frame Dimensions:	33-7/8" x 10-7/8"
Cut-Out Dimensions:	33" x 10"
Shipping Weight (lbs.):	15
Clamp Ring Size (in.):	1/8"
Tint:	28% dark gray
Window Type:	Awning Window, Screened (Clamp-in)
Fits:	All van models
Minimum Order:	1 Each
Ship Via:	Can Ship UPS

Document: Flarespace Awning-Style Bunk Window (FS1033 Awning)

View the comparison chart

Video: Flarespace Awning-Style Bunk Window (FS1033 Awning)